Light-Emitting Materials, Devices, and Technologies

Candlelight style organic light-emitting diode: a plausibly human-friendly safe night light

[+] Author Affiliations
Jwo-Huei Jou, Chun-Yu Hsieh, Po-Wei Chen, Sudhir Kumar, James H. Hong

National Tsing Hua University, Department of Materials Science and Engineering, Hsin-Chu 30013, Taiwan, China

J. Photon. Energy. 4(1), 043598 (Apr 11, 2014). doi:10.1117/1.JPE.4.043598
History: Received November 28, 2013; Revised January 14, 2014; Accepted February 11, 2014
Text Size: A A A

Open Access Open Access

Abstract.  Candles emit sensationally warm light with a very low color temperature, comparatively most suitable for use at night. In response to the need for such a human-friendly night light, we demonstrate the employment of a high number of candlelight complementary organic emitters to generate and mimic candlelight based on organic light emitting diode (OLED). One resultant candlelight style OLED shows a very-high color rendering index (CRI), with an efficacy at least 300 times that of a candle or at least two times that of an incandescent bulb. The device can be fabricated, for example, by using four candlelight complementary emitters: red, yellow, green, and sky-blue phosphorescent dyes. These dyes, in the present system, can be vacuum deposited into two emission layers that are separated by a nanolayer of carrier modulation material that is used to maximize very high CRI and energy efficiency. A nano carrier modulation layer also played a significant role in maintaining the low blue emission and high-red emission, the low color temperature of device was obtained. Importantly, a romantic sensation giving and supposedly physiologically friendly candlelight style emission can hence be driven by electricity in lieu of hydrocarbon burning and greenhouse gas-releasing candles that were invented 5000 years ago.

Figures in this Article

Latest studies on light sources mainly focus on the development of energy-saving and environmentally friendly illumination devices.1 Amongst, light-emitting diode (LED) and organic light-emitting diode (OLED) solid-state lighting26 technologies have already achieved power efficiency (PE) near to that of fluorescent tubes. However, researchers have rarely focused on developing physiologically friendly light sources, especially for use at night. Color temperature (CT) of light plays an important role in human physiology and psychology.714 Numerous studies have shown that high CT-lighting source and intensive white light or light with strong-blue emission drastically suppresses the secretion of melatonin (MLT), an oncostatic hormone. Importantly, the lack of MLT due to frequent exposure to intense light at night can increase the risk of breast, colorectal, and prostate cancers.10 Suppression of MLT secretion has been reported upon exposure of 3000- or 5000-K fluorescent lights at 200 lx,15 which is dimmer than the typical 500-lx office lighting, but brighter than the 100-lx lighting used at home.10,15 Much milder suppression can only be observed as the CT is further reduced.

The importance of light sources with a low CT can be further realized by the fact that candlelight, which exhibits a CT around 1900 K is capable of creating romantic atmosphere during dinner time.16 The pleasant sensation may originate from the naturally occurring MLT secretion, which helps people relax. In cases where lighting is needed, this secretion is less suppressed when dim light with a low CT is applied.14,17 Although the low CT candles may be used as a physiologically friendly lighting measure at night, they are very energy-inefficient, not to mention their potential fire hazard problems, flickering nature, and unpleasant smoke due to incomplete burning. All the other hydrocarbon burning-based lighting devices, e.g., oil, kerosene, or gas lamps, are not energy-saving either.

Over the past 150 years, many electricity driven lighting technologies have emerged,25 and energy efficient lighting tools have become possible. Lighting up the dark energy efficiently is no longer a major problem. However, these electrically driven lighting devices show no CT smaller than 2000 K. For example, the lowest CT is around 2500 K for incandescent bulbs, while 3000 or 5000 K for cold- or warm-white fluorescent tubes or compact fluorescent tubes, or 3000 or 5000 K for warm- or cold-white LED luminaires. They may be suitable for illumination during the daytime or at work, but apparently not for use at night. The true problems have actually arisen from the overuse of bright white light at night. Developing a new lighting source with low CT for reduced MLT suppression is hence no less urgent or less important than achieving an even higher lighting efficacy.

We demonstrate a candlelight style OLED device with a yellowish orange emission with Commission International de l’Eclairage (CIE) 1931 coordinates tunable around (0.52, 0.43) with a CT of 2000 K, closely matching the (0.52, 0.42) and 1914 K of a white candle studied. The resulting emissive spectrum shows an 80% similarity with that of the candle. The candlelight style OLED exhibits a 19-lm/W efficacy and a 93 color rendering index (CRI) while the efficacy is 0.1lm/W and CRI 83 for candles. Furthermore, candlelight has a CT varying with the variation in emissive flame position, as seen in Fig. 1. The color temperature ranges from 1847 to 2626 K, with a 1914 K at the brightest spot.

Graphic Jump LocationF1 :

Candle shows different color temperatures (CTs) at different positions inside the flame. The CT varies from 1847 to 2626 K for the white candle studied herein. To represent, the CT of the brightest spot is chosen, which is 1914 K (18).

Device Structures and Fabrication of Candlelight Style OLEDs

Each device consisted of a 125-nm indium tin oxide layer, a 35-nm poly(3,4-ethylene-dioxy-thiophene)-poly(styrenesulfonate) (PEDOT:PSS) hole-injection layer, a 20-nm di-[4-(N,Nditolylamino)-phenyl]cyclohexane (TAPC) electron-confining layer, an 5-nm-short wavelength emissive-layer, a 15-nm-long wavelength emissive-layer, a 32-nm 1,3,5-tris(N-phenylbenzimidazol- 2-yl)benzene (TPBi) electron transporting layer, a 0.8-nm lithium fluoride (LiF) layer and a 150-nm aluminum layer; short wavelength emissive-layer is 4,4′,4′′-tri(N-carbazolyl)triphenylamine (TCTA) doped with 20% bis[3,5-difl uoro-2-(2-pyridyl)phenyl]-(2-carboxypyridyl) iridium(III) (Firpic). The long wavelength emissive-layer consisted of a 1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene (TPBi) host doped with 12.5% tris(2-phenyl-pyridine) iridium (Ir(ppy)3) green dyes, 3% Iridium(III) bis(4-phenylthieno[3,2-c]pyridinato-N,C 2′)acetylacetonate (PO-01) yellow dye, and 1% bis(1-phenylisoquinolinolato-C2,N) iridium (acetylacetonate) (Ir(piq)2(acac)) deep-red dye. The fabrication of the blend interlayer, short wavelength emissive layer and long wavelength emissive layer involved vapor deposition, and the sources were prepared via the solution premixing method.19

Device Characterization

The current-voltage-luminance characteristics of the resulting phosphorescent yellow OLEDs were measured using a Keithley 2400 electrometer together with a Minolta CS-100 luminance meter. Electroluminance (EL) spectrum and CIE color coordinates were obtained by using a PR 655 SpectraScan spectroradiometer.

Figure 2 shows the photographs of a red wine containing glass illuminated by different light sources that include the candlelight style OLED, a candle, a compact fluorescent tube, and a LED bulb. A yellowish orange emission was observed as the glass was shone by the candlelight style OLED, closely resembling that shone by the white candle. Whilst, the high CT compact fluorescent tube (5363 K) or LED bulb (5953 K) yielded a cold sensation by the white emission.

Graphic Jump LocationF2 :

Lighting color-temperature effect on the photographic results of a grape-wine containing glass illuminated under different light sources, including (a) a cold white compact fluorescent lamp (CFL) with 5363 K and an 85 color rendering index (CRI), (b) a white light-emitting diode (LED) bulb with 5953 K and a 76 CRI, (c) a candle with 1914 K and an 83 CRI, and (d) the candlelight-style OLED with 1920 K and an 85 CRI. Warm sensation is originated from the candle and the candlelight-style OLED that have relatively low CT, whereas cold sensation is generated from the high CT, CFL, and LED with white emission.18

Table 1 summarizes the electroluminescent characteristics of the proposed devices. The EQE and PE of the device without an interlayer (Device I) is 16.3% and 30.3lm/W with a CT of 2361 K and CRI of 64 at 1000cd/m2. With the adding of a 2-nm TCTA interlayer, the efficiency increased to 17.8% in EQE and 30.8lm/W, and without a valuable CT and CRI. However, the blend interlayer with a 13 weight ratio of TCTA to TPBi in Device III markedly improved device CRI. Comparing with Device I, the CRI increased from 64 to 84, with a 12.5lm/W in PE, 8.7% in EQE, and 3371 K in CT increase.

Table Grahic Jump Location
Table 1Effect of thickness and composition of a carrier modulation layer (CML) on the device color temperature (CT), candlelight spectrum resemblance, color rendering index (CRI), and power efficiency results (18).
Table Footer Noteaat 100/1,000/10,000 cd/m2;
Table Footer Notebcompared with normalized spectrum;
Table Footer NotecAbbreviations; THK-Thickncss;

The efficiency increased to 14.6% and 19.2lm/W when the amount of TPBi further decreased in Device IV, and decreased to 12.3% and 15.6lm/W as the interlayer increased to 2.5 nm for Device V. As the interlayer thickness decreased to 1.5 nm in device VI, the EQE decreased to 12.9%, although the PE of Device VI, which is 19.4lm/W, is very similar to that of Device III. These three devices show comparatively high CRI, i.e., 93 for Device IV, 93 for Device V, and 83 for VI.

Device II exhibits the highest efficiency, and it may be attributed to the electrons confinement effect of the carrier modulation layer (CML), TCTA, due to its relative high LUMO level compared with that of TPBi and forms a significant barrier for electrons to overcome. The energy diagram in Fig. 3 can be used to illustrate this effect. As the use of TCTA as CML, a large amount of electrons are confined in the red and yellow emissive layer, which enables more excitons to generate and hence the device efficiency increased.

Graphic Jump LocationF3 :

Schematic illustration of candlelight style OLEDs without an interlayer (Device I), and with a neat TCTA interlayer (Device II). Devices III to VI all had a blend carrier modulation layer (CML), where the thickness was 1.5 nm for Device VI, 2.5 nm for Device V, and 2-nm Devices III and IV. The ratios of TCTA to TPBi in the blend layers of Devices II to VI were 10, 13, 31, 31, 31, respectively. This figure also shows the plausible distributions of holes and electrons in the studied devices at the same current density. With the use of a blend interlayer with proper compositions and thicknesses, the entering holes and electrons can be well distributed into the two-emissive zones.

However, either with or without a CML, no blue emission can be observed from the EL spectrum, as Fig. 4. To enable more electrons to inject into the blue-emissive layer, the TCTA-based CML was modified by blending it with an electron-transporting material TPBi, via which electrons can much more freely penetrate from the yellow red emissive layer to blue emissive layer. This enhances the intensity of the blue emission. Although, the blue emission was overly increased due to the presence of a new barrier (0.4 eV) against holes at the interface between the blue emissive layer and the TPBi in the blend CML, and causes too few holes to enter the yellow red emissive zone.

Graphic Jump LocationF4 :

Electroluminescent spectra of no and neat CML-composing counterparts. (a) With no CML, (b) a 2-nm neat TCTA as interlayer. All spectra were obtained at 5A/m2.

To enable sufficient holes to inject into the yellow red emissive layer, blend CML was further modified by reducing the amount of TPBi used, which is also effective in electron transporting as mentioned before. This explains why the blue emission markedly decreased when the ratio of TCTA: TPBi employed fell from 13 to 31, as shown in Fig. 5.

Graphic Jump LocationF5 :

Electroluminescent spectra of the blend CML-composing devices.

The function of the blend CML is also sensitive to the employed thickness. Increase or decrease the thickness of CML, both can lower the device efficiency. This may be because more excitons were generated within the CML, either on TCTA or on TPBi. Although energy transfer can still occur via diffusion of the generated excitons, their effectiveness drastically decreased as the diffusion distance increased, which explains why both the intensities dropped as the CML thickness increase. In case of thinner CML thickness device, no sufficient excitons are generated and diffuse into emissive zone, cause a lower efficiency.

In this study, we demonstrate a candlelight style OLED device with a yellowish orange emission with Commission International de l’Eclairage (CIE) 1931 coordinates tunable around (0.52, 0.43) with a CT of 2000 K, closely matching the (0.52, 0.42) and 1914 K of a white candle studied. The candlelight style OLED exhibits a 19lm/W efficacy and a 93 CRI, while the efficacy is 0.1lm/W and CRI 83 for candles. The high efficiency of the proposed device may be attributed to the employed blend interlayer, which helps effectively distribute the entering carriers into the available recombination zones. These candlelight style OLEDs are an ideal lighting source to safeguard human health, especially for use at night.

The authors would like to acknowledge support from National Science Council and Ministry of Economic Affairs, Taiwan. This work was financially supported in part by grants: NSC101-3113-E-007-001, NSC100-2119-M-007-011-MY3, and MEA 100-EC-17-A- 07-S1-181.

Adamovich  V. et al., “High efficiency single dopant white electrophosphorescent light emitting diodes,” New J. Chem.. 26, (9 ), 1171 –1178 (2002), CrossRef. 1144-0546 
Kido  J., Kimura  M., Nagai  K., “Multilayer white light-emitting organic electroluminescent device,” Science. 267, (5202 ), 1332 –1334 (1995), CrossRef. 0036-8075 
Service  R. F., “Organic LEDs look forward to a bright, white future,” Science. 310, (5755 ), 1762 –1763 (2005), CrossRef. 0036-8075 
So  F., Kido  J., Burrows  P., “Organic light-emitting devices for solid-state lighting,” MRS. Bull.. 33, (7 ), 663 –669 (2008), CrossRef. 0883-7694 
Jou  J. H. et al., “High-efficiency flexible white organic light-emitting diodes,” J. Mater. Chem.. 20, (32 ), 6626 –6629 (2010), CrossRef. 0959-9428 
Jou  J. H. et al., “Sunlight-style color-temperature tunable organic light-emitting diode,” Appl. Phys. Lett.. 95, (1 ), 013307  (2009), CrossRef. 0003-6951 
van Bommel  W. J. M., “Non-visual biological effect of lighting and the practical meaning for lighting for work,” Appl. Ergon.. 37, (4 ), 461 –466 (2006), CrossRef. 0003-6870 
Küller  L. W. R., “Melatonin, cortisol, EEG, ECG and subjective comfort in healthy humans: Impact of two fluorescent lamp types at two light intensities,” Light. Res. Technol.. 25, (2 ), 71 –80 (1993), CrossRef. 0024-3426 
Mills  P. R., Tomkins  S. C., Schlangen  L. J. M., “The effect of high correlated colour temperature office lighting on employee wellbeing and work performance,” J. Circadian Rhythms. 5, (2 ) (2007), CrossRef. 1740-3391 
Pauley  S. M., “Lighting for the human circadian clock: recent research indicates that lighting has become a public health issue,” Med. Hypotheses. 63, (4 ), 588 –596 (2004), CrossRef. 0306-9877 
Brainard  G. C. et al., “The Influence of various irradiances of artificial-light, twilight, and moonlight on the suppression of pineal melatonin content in the syrian-hamster,” J. Pineal. Res.. 1, (2 ), 105 –119 (1984), CrossRef. 0742-3098 
Lockley  S. W., Brainard  G. C., Czeisler  C. A., “High sensitivity of the human circadian melatonin rhythm to resetting by short wavelength light,” J. Clin. Endocrinol. Metab.. 88, (9 ), 4502 –4505 (2003), CrossRef. 0021-972X 
Scheer  F. A. J. L., Buijs  R. M., “Light affects morning salivary cortisol in humans,” J. Clin. Endocrinol. Metab.. 84, (9 ), 3395 –3398 (1999), CrossRef. 0021-972X 
Sato  M., Sakaguchi  T., Morita  T., “The effects of exposure in the morning to light of different color temperatures on the behavior of core temperature and melatonin secretion in humans,” Biol. Rhythm Res.. 36, (4 ), 287 –292 (2005), CrossRef. 0929-1016 
Kozaki  T. et al., “Effects of short wavelength control in polychromatic light sources on nocturnal melatonin secretion,” Neurosci. Lett.. 439, (3 ), 256 –259 (2008), CrossRef. 0304-3940 
Potera  C., “The core of the candle problem,” Environ. Health Perspect.. 108, (4 ), A165 –A165 (2000). 0091-6765 
Panzer  A., “Depression or cancer: the choice between serotonin or melatonin,” Med. Hypotheses. 50, (5 ), 385 –387 (1998), CrossRef. 0306-9877 
Jou  J. H. et al., “Candle light-style organic light-emitting diodes,” Adv. Funct. Mater.. 23, (21 ), 2750 –2757 (2013), CrossRef. 1616-3028 
Jou  J. H. et al., “Efficient, color-stable fluorescent white organic light-emitting diodes with single emission layer by vapor deposition from solvent premixed deposition source,” Appl. Phys. Lett.. 88, (19 ), 193501  (2006), CrossRef. 0003-6951 

Biographies of the authors are not available.

© The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Citation

Jwo-Huei Jou ; Chun-Yu Hsieh ; Po-Wei Chen ; Sudhir Kumar and James H. Hong
"Candlelight style organic light-emitting diode: a plausibly human-friendly safe night light", J. Photon. Energy. 4(1), 043598 (Apr 11, 2014). ; http://dx.doi.org/10.1117/1.JPE.4.043598


Figures

Graphic Jump LocationF1 :

Candle shows different color temperatures (CTs) at different positions inside the flame. The CT varies from 1847 to 2626 K for the white candle studied herein. To represent, the CT of the brightest spot is chosen, which is 1914 K (18).

Graphic Jump LocationF2 :

Lighting color-temperature effect on the photographic results of a grape-wine containing glass illuminated under different light sources, including (a) a cold white compact fluorescent lamp (CFL) with 5363 K and an 85 color rendering index (CRI), (b) a white light-emitting diode (LED) bulb with 5953 K and a 76 CRI, (c) a candle with 1914 K and an 83 CRI, and (d) the candlelight-style OLED with 1920 K and an 85 CRI. Warm sensation is originated from the candle and the candlelight-style OLED that have relatively low CT, whereas cold sensation is generated from the high CT, CFL, and LED with white emission.18

Graphic Jump LocationF3 :

Schematic illustration of candlelight style OLEDs without an interlayer (Device I), and with a neat TCTA interlayer (Device II). Devices III to VI all had a blend carrier modulation layer (CML), where the thickness was 1.5 nm for Device VI, 2.5 nm for Device V, and 2-nm Devices III and IV. The ratios of TCTA to TPBi in the blend layers of Devices II to VI were 10, 13, 31, 31, 31, respectively. This figure also shows the plausible distributions of holes and electrons in the studied devices at the same current density. With the use of a blend interlayer with proper compositions and thicknesses, the entering holes and electrons can be well distributed into the two-emissive zones.

Graphic Jump LocationF4 :

Electroluminescent spectra of no and neat CML-composing counterparts. (a) With no CML, (b) a 2-nm neat TCTA as interlayer. All spectra were obtained at 5A/m2.

Graphic Jump LocationF5 :

Electroluminescent spectra of the blend CML-composing devices.

Tables

Table Grahic Jump Location
Table 1Effect of thickness and composition of a carrier modulation layer (CML) on the device color temperature (CT), candlelight spectrum resemblance, color rendering index (CRI), and power efficiency results (18).
Table Footer Noteaat 100/1,000/10,000 cd/m2;
Table Footer Notebcompared with normalized spectrum;
Table Footer NotecAbbreviations; THK-Thickncss;

References

Adamovich  V. et al., “High efficiency single dopant white electrophosphorescent light emitting diodes,” New J. Chem.. 26, (9 ), 1171 –1178 (2002), CrossRef. 1144-0546 
Kido  J., Kimura  M., Nagai  K., “Multilayer white light-emitting organic electroluminescent device,” Science. 267, (5202 ), 1332 –1334 (1995), CrossRef. 0036-8075 
Service  R. F., “Organic LEDs look forward to a bright, white future,” Science. 310, (5755 ), 1762 –1763 (2005), CrossRef. 0036-8075 
So  F., Kido  J., Burrows  P., “Organic light-emitting devices for solid-state lighting,” MRS. Bull.. 33, (7 ), 663 –669 (2008), CrossRef. 0883-7694 
Jou  J. H. et al., “High-efficiency flexible white organic light-emitting diodes,” J. Mater. Chem.. 20, (32 ), 6626 –6629 (2010), CrossRef. 0959-9428 
Jou  J. H. et al., “Sunlight-style color-temperature tunable organic light-emitting diode,” Appl. Phys. Lett.. 95, (1 ), 013307  (2009), CrossRef. 0003-6951 
van Bommel  W. J. M., “Non-visual biological effect of lighting and the practical meaning for lighting for work,” Appl. Ergon.. 37, (4 ), 461 –466 (2006), CrossRef. 0003-6870 
Küller  L. W. R., “Melatonin, cortisol, EEG, ECG and subjective comfort in healthy humans: Impact of two fluorescent lamp types at two light intensities,” Light. Res. Technol.. 25, (2 ), 71 –80 (1993), CrossRef. 0024-3426 
Mills  P. R., Tomkins  S. C., Schlangen  L. J. M., “The effect of high correlated colour temperature office lighting on employee wellbeing and work performance,” J. Circadian Rhythms. 5, (2 ) (2007), CrossRef. 1740-3391 
Pauley  S. M., “Lighting for the human circadian clock: recent research indicates that lighting has become a public health issue,” Med. Hypotheses. 63, (4 ), 588 –596 (2004), CrossRef. 0306-9877 
Brainard  G. C. et al., “The Influence of various irradiances of artificial-light, twilight, and moonlight on the suppression of pineal melatonin content in the syrian-hamster,” J. Pineal. Res.. 1, (2 ), 105 –119 (1984), CrossRef. 0742-3098 
Lockley  S. W., Brainard  G. C., Czeisler  C. A., “High sensitivity of the human circadian melatonin rhythm to resetting by short wavelength light,” J. Clin. Endocrinol. Metab.. 88, (9 ), 4502 –4505 (2003), CrossRef. 0021-972X 
Scheer  F. A. J. L., Buijs  R. M., “Light affects morning salivary cortisol in humans,” J. Clin. Endocrinol. Metab.. 84, (9 ), 3395 –3398 (1999), CrossRef. 0021-972X 
Sato  M., Sakaguchi  T., Morita  T., “The effects of exposure in the morning to light of different color temperatures on the behavior of core temperature and melatonin secretion in humans,” Biol. Rhythm Res.. 36, (4 ), 287 –292 (2005), CrossRef. 0929-1016 
Kozaki  T. et al., “Effects of short wavelength control in polychromatic light sources on nocturnal melatonin secretion,” Neurosci. Lett.. 439, (3 ), 256 –259 (2008), CrossRef. 0304-3940 
Potera  C., “The core of the candle problem,” Environ. Health Perspect.. 108, (4 ), A165 –A165 (2000). 0091-6765 
Panzer  A., “Depression or cancer: the choice between serotonin or melatonin,” Med. Hypotheses. 50, (5 ), 385 –387 (1998), CrossRef. 0306-9877 
Jou  J. H. et al., “Candle light-style organic light-emitting diodes,” Adv. Funct. Mater.. 23, (21 ), 2750 –2757 (2013), CrossRef. 1616-3028 
Jou  J. H. et al., “Efficient, color-stable fluorescent white organic light-emitting diodes with single emission layer by vapor deposition from solvent premixed deposition source,” Appl. Phys. Lett.. 88, (19 ), 193501  (2006), CrossRef. 0003-6951 

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging & repositioning the boxes below.

Related Book Chapters

Topic Collections

PubMed Articles
Advertisement


 

  • Don't have an account?
  • Subscribe to the SPIE Digital Library
  • Create a FREE account to sign up for Digital Library content alerts and gain access to institutional subscriptions remotely.
Access This Article
Sign in or Create a personal account to Buy this article ($20 for members, $25 for non-members).
Access This Proceeding
Sign in or Create a personal account to Buy this article ($15 for members, $18 for non-members).
Access This Chapter

Access to SPIE eBooks is limited to subscribing institutions and is not available as part of a personal subscription. Print or electronic versions of individual SPIE books may be purchased via SPIE.org.