Presentation + Paper
17 March 2023 Low-loss photonic integrated circuits for UV applications
Author Affiliations +
Abstract
We present a low propagation loss aluminium oxide integrated photonics platform enabling applications with operation down to the UV wavelength range (i.e., <250 nm). Single mode fully etched waveguides were fabricated with losses below 2 dB/cm at 405 nm. The influence of waveguide dimensions on the propagation losses are presented, indicating that losses are sidewall roughness limited. Lower losses can be achieved by further optimization of the cross-section of the waveguides. In this presentation, the aluminium oxide platform will be introduced together with the characterization of the waveguides at near-UV wavelengths.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. A. P. M. Hendriks, M. Dijkstra, S. Mardani, I. Hegeman, and Sonia M. Garcia-Blanco "Low-loss photonic integrated circuits for UV applications", Proc. SPIE 12424, Integrated Optics: Devices, Materials, and Technologies XXVII, 1242402 (17 March 2023); https://doi.org/10.1117/12.2657143
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Ultraviolet radiation

Photonic integrated circuits

Aluminum

Light wave propagation

Aluminum oxide

Atomic layer deposition

Back to Top