Paper
1 December 1997 Polymer light-emitting diodes of poly(m-phenylene-thiophene) derivative and tris(8-hydroxyquinoline) aluminum heterostructure
Lee Mi Do, Do Hoon Hwang, Kang Hoon Choi, Hyang Mok Lee, Sang Don Jung, Taehyoung Zyung, Bong-Soo Kang, Sung-Chul Shin
Author Affiliations +
Abstract
Multicolored electroluminescent (EL) devices has been realized utilizing poly((1-dodecyloxy-4-methyl-1,3- phenylene)(2,5"-terthienylene)) (mPTTh) as an emitting layer and tris(8-hydroxyquinoline) aluminum (Alq3) as an electron transport layer. A single layer EL device of mPTTh polymer emits orange-colored light. EL intensity increase as the thickness of Alq3 layer increases up to 30 nm, but the emission color becomes diversified when the Alq3 layer thickness is greater than 30 nm since the relative peak intensity of green EL from Alq3 layer grows. EL color is changed form orange to greenish orange depending on the thickness of Alq3 layer. EL efficiency of the double layer device was greatly enhanced by 3000 times in compared to that of single layer device. Alq3 layer in device acts as a hole blocking electron transporting layer and an emitting layer as a function of the thickness of Alq3 layer.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lee Mi Do, Do Hoon Hwang, Kang Hoon Choi, Hyang Mok Lee, Sang Don Jung, Taehyoung Zyung, Bong-Soo Kang, and Sung-Chul Shin "Polymer light-emitting diodes of poly(m-phenylene-thiophene) derivative and tris(8-hydroxyquinoline) aluminum heterostructure", Proc. SPIE 3148, Organic Light-Emitting Materials and Devices, (1 December 1997); https://doi.org/10.1117/12.295543
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Electroluminescence

Heterojunctions

Aluminum

Electron transport

Organic light emitting diodes

Luminescence

Back to Top