Simulation, modeling, and comparison of III-V tunnel junction designs for high efficiency metamorphic multi-junction solar cells

Alexandre W Walker; Jeffrey F. Wheeldon; Christopher E. Valdivia; Gitanjali Kolhatkar; Karin Hinzer

doi:10.1117/12.872882

22 September 2010 Simulation, modeling, and comparison of III-V tunnel junction designs for high efficiency metamorphic multi-junction solar cells

Alexandre W Walker, Jeffrey F. Wheeldon, Christopher E. Valdivia, Gitanjali Kolhatkar, Karin Hinzer

Author Affiliations +

Proceedings Volume 7750, Photonics North 2010; 77502X (2010) https://doi.org/10.1117/12.872882
Event: Photonics North 2010, 2010, Niagara Falls, Canada

Abstract

Simulations of Al_xGa_1-xAs/GaAs (x = 0.3) and Al_xGa_1-xAs/Al_xGa_1-xAs (x < 0.2) tunnel junction J-V characteristics are studied for integration into a 2D metamorphic multi-junction solar cell model composed of GaInP/GaAs/InGaAs. A comparison of the simulated solar cell J-V characteristics under AM1.5D spectrum is discussed in terms of short circuit current density (J_sc), open circuit voltage (V_OC), fill factor (FF) and efficiency (η) for both tunnel junction designs. Using Al_xGa_1-xAs/GaAs top and bottom tunnel junctions, the metamorphic solar cell obtained values of J_sc = 12.3 mA/cm², V_OC = 2.56 V, FF = 0.81 and η = 25.5%, whereas the solar cell with the Al_xGa_1-xAs/Al_xGa_1-xAs top and bottom tunnel junctions reported values of J_sc = 12.3 mA/cm², V_OC = 2.22 V, FF = 0.81 and η = 22.1%. At open circuit voltage, energy band diagrams show minimal curvature in the electron and hole quasi Fermi levels; furthermore, the difference between the top sub-cell electron quasi Fermi level and the bottom sub-cell hole quasi Fermi level is shown to be equal to qV_OC for both designs. The energy band diagram of the complete structure is compared for both tunnel junction designs, showing the difference in energy levels that correspond to the difference in measured open circuit voltage. The observed decrease in open circuit voltage was ΔV_OC = 0.34 V, which was attributed to the difference in tunnel junction material band parameters such as bandgap, valence and conduction band offsets at heterojunctions and Fermi level degeneracies due to doping concentration differences.

Citation Download Citation

Alexandre W Walker, Jeffrey F. Wheeldon, Christopher E. Valdivia, Gitanjali Kolhatkar, and Karin Hinzer "Simulation, modeling, and comparison of III-V tunnel junction designs for high efficiency metamorphic multi-junction solar cells", Proc. SPIE 7750, Photonics North 2010, 77502X (22 September 2010); https://doi.org/10.1117/12.872882

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available