Paper
18 September 2013 Wet-chemistry based selective coatings for concentrating solar power
Eran Maimon, Abraham Kribus, Yuri Flitsanov, Oleg Shkolnik, Daniel Feuermann, Camille Zwicker, Liraz Larush, Daniel Mandler, Shlomo Magdassi
Author Affiliations +
Abstract
Spectrally selective coatings are common in low and medium temperature solar applications from solar water heating collectors to parabolic trough absorber tubes. They are also an essential element for high efficiency in higher temperature Concentrating Solar Power (CSP) systems. Selective coatings for CSP are usually prepared using advanced expensive methods such as sputtering and vapor deposition. In this work, coatings were prepared using low-cost wet-chemistry methods. Solutions based on Alumina and Silica sol gel were prepared and then dispersed with black spinel pigments. The black dispersions were applied by spray/roll coating methods on stainless steel plates. The spectral emissivity of sample coatings was measured in the temperature range between 200 and 500°C, while the spectral absorptivity was measured at room temperature and 500°C. Emissivity at wavelengths of 0.4–1.7 μm was evaluated indirectly using multiple measurements of directional reflectivity. Emissivity at wavelengths 2–14 μm was measured directly using a broadband IR camera that acquires the radiation emitted from the sample, and a range of spectral filters. Emissivity measurement results for a range of coated samples will be presented, and the impact of coating thickness, pigment loading, and surface preparation will be discussed.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eran Maimon, Abraham Kribus, Yuri Flitsanov, Oleg Shkolnik, Daniel Feuermann, Camille Zwicker, Liraz Larush, Daniel Mandler, and Shlomo Magdassi "Wet-chemistry based selective coatings for concentrating solar power", Proc. SPIE 8834, Nonimaging Optics: Efficient Design for Illumination and Solar Concentration X, 88340D (18 September 2013); https://doi.org/10.1117/12.2025579
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Gold

Silica

Temperature metrology

Reflectivity

Black bodies

Infrared cameras

Aluminum

Back to Top