Analysis of transmitted optical spectrum enabling accelerated testing of multijunction concentrating photovoltaic designs

David C. Miller; Michael D. Kempe; Cheryl E. Kennedy; Sarah R. Kurtz

doi:10.1117/1.3530092

1 January 2011 Analysis of transmitted optical spectrum enabling accelerated testing of multijunction concentrating photovoltaic designs

David C. Miller, Michael D. Kempe, Cheryl E. Kennedy, Sarah R. Kurtz

Author Affiliations +

Optical Engineering, Vol. 50, Issue 1, 013003 (January 2011). https://doi.org/10.1117/1.3530092

Abstract

Concentrating photovoltaic (CPV) technology has recently gained interest based on its scalability and expected low levelized cost of electricity. The reliability of encapsulation materials used in CPV systems, however, is not well established. For example, the present qualification test for CPV modules includes only real-time ultraviolet (UV) exposure, i.e., methods for accelerated UV testing have not yet been developed. To better define the stress inherent to CPV systems, the UV and infrared spectra transmitted through representative optical systems were evaluated. Measurements of optical components are used to assess expected optical performance and quantify damaging optical exposure. Optical properties (transmittance, refractive index, reflectance, and absorptance) of candidate materials (including PMMA, soda-lime glass, borosilicate glass, and quartz refractors), components (including Ag- and Al-enabled reflectors), and encapsulants (including EVA, ionomer, PDMS, PPMS, polyolefin, and PVB) were identified. The activation spectrum was calculated for the representative optical systems using an assumed action spectrum to compare the expected damaging dose of UV radiation delivered to the cell encapsulation. The dose and flux analysis identifies the significance of IR relative to UV exposure for CPV systems. Because UV light is typically more highly attenuated, the UV dose within the encapsulation may not greatly exceed the unconcentrated global solar condition, but the thermal load scales nearly directly with the geometric concentration. Relative to a previous analysis for crystalline silicon cell technology, the analysis here is performed for III-V multijunction technology. Novel aspects here also include additional materials (such as TPU encapsulation) and additional components (transmission through silicone on glass lenses, antireflective coatings, and the front glass used with reflective systems, as well as reflection off of the cell).

©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

David C. Miller, Michael D. Kempe, Cheryl E. Kennedy, and Sarah R. Kurtz "Analysis of transmitted optical spectrum enabling accelerated testing of multijunction concentrating photovoltaic designs," Optical Engineering 50(1), 013003 (1 January 2011). https://doi.org/10.1117/1.3530092

Published: 1 January 2011

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available