Paper
22 December 2016 Structural investigation of MF, RF and DC sputtered Mo thin films for backside photovoltaic electrode
Author Affiliations +
Proceedings Volume 10175, Electron Technology Conference 2016; 1017519 (2016) https://doi.org/10.1117/12.2263484
Event: Electron Technology Conference ELTE 2016, 2016, Wisla, Poland
Abstract
Recently photovoltaics attracts much attention of research and industry. The multidirectional studies are carried out in order to improve solar cells performance, the innovative materials are still searched and existing materials and technology are optimized. In the multilayer structure of CIGS solar cells molybdenum (Mo) layer is used as a back contact. Mo layers meet all requirements for back side electrode: low resistivity, good adhesion to the substrate, high optical reflection in the visible range, columnar structure for Na ions diffusion, formation of an ohmic contact with the ptype CIGS absorber layer, and high stability during the corrosive selenization process. The high adhesion to the substrate and low resistivity in single Mo layer is difficult to be achieved because both properties depend on the deposition parameters, particularly on working gas pressure. Therefore Mo bilayers are applied as a back contact for CIGS solar cells. In this work the Mo layers were deposited by medium frequency sputtering at different process parameters. The effect of substrate temperature within the range of 50°C-200°C and working gas pressure from 0.7 mTorr to 7 mTorr on crystalline structure of Mo layers was studied.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anna K. Małek, Konstanty W. Marszałek, and Artur M. Rydosz "Structural investigation of MF, RF and DC sputtered Mo thin films for backside photovoltaic electrode", Proc. SPIE 10175, Electron Technology Conference 2016, 1017519 (22 December 2016); https://doi.org/10.1117/12.2263484
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Molybdenum

Crystals

Solar cells

Copper indium gallium selenide

Sputter deposition

Electrodes

Thin films

RELATED CONTENT

Molybdenum (Mo) back contacts for CIGS solar cells
Proceedings of SPIE (December 16 2013)
Thin films technologies for utility devices
Proceedings of SPIE (April 29 2008)
Nanoengineered CIGS thin films for low cost photovoltaics
Proceedings of SPIE (September 10 2008)
Recent progress of Cu(InGa)Se[sub]2[/sub] solar cells
Proceedings of SPIE (December 17 2011)

Back to Top