Optimization and characterization of inkjet-printed ferroelectric capacitor for human body detection

Y. Arango; Jean-Fabien Capsal; Lionel Fritsch; Mohamed Saadaoui

doi:10.1117/12.2513874

13 March 2019 Optimization and characterization of inkjet-printed ferroelectric capacitor for human body detection

Y. Arango, Jean-Fabien Capsal, Lionel Fritsch, Mohamed Saadaoui

Author Affiliations +

Proceedings Volume 10966, Electroactive Polymer Actuators and Devices (EAPAD) XXI; 1096608 (2019) https://doi.org/10.1117/12.2513874
Event: SPIE Smart Structures + Nondestructive Evaluation, 2019, Denver, Colorado, United States

Abstract

Ferroelectric polymers are materials of choice for the development of pyroelectric sensor for IR detection and imaging. Additive manufacturing by inkjet printing is a promising technology that enable the rapid customization and development of high-resolution sensors without ink waste. In this context, it is important to optimize the formulation and printing of electronic ink’s with respect to the different interfaces involved in the fabrication process. In this work, we present the development and characterization of fully printed ferroelectric capacitor on a CMOS wafer. Firstly, Polyvinylidene fluoride trifluoroethylene [P(VDF-TrFE)] is formulated as an ink with respect to its relative viscosity and surface tension and it is inkjet-printed on Ti/TiN thin-film that act as bottom electrode. The printed layer is 3μm thick after crystallization annealing. Then, top electrodes were inkjet-printed on PVDF-TrFE using Ag based ink with different concentration, in order to study the interfacial interaction between the P(VDF-TrFE) and the top electrode. For all the ferroelectric capacitors, the dielectric and ferroelectric properties were analyzed. We demonstrated that the choice of the top electrode ink and it’s thermal annealing are key parameters that control the final electroactivity of the printed sensor.

Conference Presentation

Citation Download Citation

Y. Arango, Jean-Fabien Capsal, Lionel Fritsch, and Mohamed Saadaoui "Optimization and characterization of inkjet-printed ferroelectric capacitor for human body detection", Proc. SPIE 10966, Electroactive Polymer Actuators and Devices (EAPAD) XXI, 1096608 (13 March 2019); https://doi.org/10.1117/12.2513874

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE