Paper
10 May 2019 Fabrication and damage characteristics of low stress HR films for femtosecond laser system
Guoyun Long, Yaoping Zhang
Author Affiliations +
Proceedings Volume 11068, Second Symposium on Novel Technology of X-Ray Imaging; 110681F (2019) https://doi.org/10.1117/12.2524519
Event: Second Symposium on Novel Technology of X-Ray Imaging, 2018, Hefei, China
Abstract
With the development of femtosecond laser system, the laser damage threshold of optical components becomes more important. Meanwhile, in order to obtain better laser beam quality and avoid wavefront distortion caused by optical components, more stringent requirements are put forward for the surface shape of the coated surface of mirrors. HfO2-SiO2 high reflective films were fabricated by e-beam thermal evaporation method. Internal stress of the multilayer dielectrics was modulated by changing the design of films and coating process. Finally, the film with an absolute internal stress less than 100MPa was obtained. The laser damage characteristics of the films at 35fs, 1000Hz were studied, and the damage mechanism was analyzed.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guoyun Long and Yaoping Zhang "Fabrication and damage characteristics of low stress HR films for femtosecond laser system", Proc. SPIE 11068, Second Symposium on Novel Technology of X-Ray Imaging, 110681F (10 May 2019); https://doi.org/10.1117/12.2524519
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser induced damage

Laser systems engineering

Femtosecond phenomena

Coating

Multilayers

Oxygen

Mirrors

Back to Top