|
Since the second quantum revolution, the growing exploitation of quantum states led to many sophisticated and novel applications [Phil. Trans. R. Soc. Lond. A 361, 1655 (2003). Former, mainly academic research is more and more transferred into real-world quantum technology ready to serve practical tasks. Today, the quantum computer is within reach, satellite based quantum communication already started, and the field of sensing and imaging was revolutionized, too. Non-classical states of light promise a phase sensitivity beyond any classical possibility [PRL 112, 103604 (2014)] and super-resolution capability [Nature Commun. 8, 14786 (2017)]. Moreover, based on quantum correlations, which are rooted in the very heart of quantum mechanics, the imaging of samples with photons that have never interacted with the object is feasible. This science fiction like phenomenon was first investigated by Mandel [PRA 44, 4614 (1991)] and later implemented for actual imaging purposes in the Zeilinger group [Nature 512, 409 (2014)]. We are going to present the transfer of this approach into applicable quantum technology within the realm of the Fraunhofer Key Research Initiative Quantum Methods for Advanced Imaging Solutions (QUILT).
The method itself is based on induced coherence without induced emission [PRA 44, 4614 (1991)]. We built a novel compact implementation of this scheme based on only one nonlinear crystal. The crystal is coherently pumped by a laser from two sides such that signal and idler photon pairs can be collinearly emitted in either of two opposite directions (to the right or to the left). On the right side the idler beam will be separated by a dichroic mirror (DM) and interacts with an object (directly placed in front of a mirror or reflective object). On the left side the signal beam will be separated by another dichroic mirror and hit the camera, which is either a sCMOS or an EMCCD. Additional lenses provide the particular imaging. Sine the two possibilities for the idler beam – going right and interact with the object or going left from the nonlinear crystal – interfere the object could be observed by idler detection. However, the same interference can be observed for the signal beams although the never interacted with the object. Hence, the object can be imaged by detecting the signal light only. The crucial point here is the lack of wich-path information of the idler beams in this type of Michelson interferometric setup. The following points should be emphasized: (i) the signal channels never interact with the object, (ii) there is no induced emission due to the idler beam that interacted with the object, and (iii) there is no coincidence detection involved in this scheme. The obvious advantage of this technique is that the wavelength of the idler photons can be tailored to match the interesting spectral range for interaction with the object. At the same time, the signal photons, which are actually detected, can stay in the VIS range where, e.g., Si-based detectors are optimized.
Besides the application for life science imaging, we are comparing the quantum imaging properties utilizing momentum correlations or spatial correlations, where the ladder is a modus that was never investigated before. As an outlook we work on significantly enhance SPDC sources in scope of quantum performance and wavelength separation. Obviously, pushing the short-wavelength idler photons further into the deep UV or XUV broadens the range of applications, but must be implemented by non-SPDC photon pair sources.
|
