Pulse to pulse control in micromachining with femtosecond lasers

G. Mincuzzi; A. Bourtereau; A. Rebière; Hugo Laborie; M. Faucon; M. Delaigue; K. Mishchik; C. Hoenninger; E. Audouard; R. Kling

doi:10.1117/12.2545638

2 March 2020 Pulse to pulse control in micromachining with femtosecond lasers

G. Mincuzzi, A. Bourtereau, A. Rebière, Hugo Laborie, M. Faucon, M. Delaigue, K. Mishchik, C. Hoenninger, E. Audouard, R. Kling

Author Affiliations +

Proceedings Volume 11268, Laser-based Micro- and Nanoprocessing XIV; 112681F (2020) https://doi.org/10.1117/12.2545638
Event: SPIE LASE, 2020, San Francisco, California, United States

Abstract

Ultra-fast laser in micromachining have a reputation of highest precision and quality, which justifies additional invest in numerous applications. However, deficits in the synchronization of the positioning of beam deflection device and laser triggering -in particular at high repetition rates- still lead to defects like overtreatment due to the inertia of the mirrors of galvanometer scanners or path deviations at complex shapes. This in turn has led to an increasing demand of advanced pulse to pulse control for precise laser energy deposition. Two recent innovations have the potential to overcome these current limitations. Firstly, the scan ahead feature allows to calculate the actual beam position in acceleration and deceleration mode. According to the precise position feedback the control needs to adjust the repetition rate of the laser source e.g. at rectangular corners of a scan trajectory. Therefore, the pulse on demand feature at the laser interface is obligatory to dynamically adjust the pulse to pulse delay in order to accomplish constant energy deposition at any programmed scan pattern. We have put these two innovations to a test by combining an Excelliscan from Scanlab with an UV Tangor laser from Amplitude to validate the synchronization and constant pulse separation at various scan speeds and geometrical patterns. Applications trials like engraving with scan speed are presented in comparison to conventional scanning techniques to demonstrate the benefit of the fast synchronization and pulse on demand technologies.

Conference Presentation

Citation Download Citation

G. Mincuzzi, A. Bourtereau, A. Rebière, Hugo Laborie, M. Faucon, M. Delaigue, K. Mishchik, C. Hoenninger, E. Audouard, and R. Kling "Pulse to pulse control in micromachining with femtosecond lasers", Proc. SPIE 11268, Laser-based Micro- and Nanoprocessing XIV, 112681F (2 March 2020); https://doi.org/10.1117/12.2545638

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available