Beam finite spot size effect on angle-tolerant optical filters

Noha Anous; Diaa Khalil

doi:10.1117/12.2546209

25 February 2020 Beam finite spot size effect on angle-tolerant optical filters

Noha Anous, Diaa Khalil

Author Affiliations +

Proceedings Volume 11283, Integrated Optics: Devices, Materials, and Technologies XXIV; 112832G (2020) https://doi.org/10.1117/12.2546209
Event: SPIE OPTO, 2020, San Francisco, California, United States

Abstract

Theoretical performance analysis of optical filters is usually done assuming an incident plane wave. This may be a good indicator of the device performance when the spot size of the incident beam is much greater than the operating wavelength. However, in practice the incident beam is usually focused on a very small spot to fit the device footprint. Such focused beams contain a range of incident angles, i.e., a set of different plane waves. Thus, a degradation is expected in the filter spectral transmission behavior when compared to that theoretically determined by using a plane wave model. Angle tolerant filters are filters that preserve their spectral properties under a wide range of angles. This work aims at studying the effect of an inclined Gaussian beam finite spot size on the transmission performance of a five-layer angle-tolerant hybrid plasmonic multilayer filter structure by applying beam expansion method analysis. For spot sizes of 10 micrometers, the filter transmission preserves its shape for different angles of incidence. As the spot size narrows to 0.1 micrometers, transmission preserves its shape but loses around 8% compared to plane wave case. Further deterioration is observed for the same spot size at an angle of incidence of 50 degrees. The behavior is found to be limited by the filter’s field of view (FOV). The FOV of the filter we used in the study is around 50 degrees. Hence, with narrower beams, a larger angular divergence is present which cannot be compensated by the angle tolerance of the filter. To the best of our knowledge, similar work has not been studied in existing literature.

Citation Download Citation

Noha Anous and Diaa Khalil "Beam finite spot size effect on angle-tolerant optical filters", Proc. SPIE 11283, Integrated Optics: Devices, Materials, and Technologies XXIV, 112832G (25 February 2020); https://doi.org/10.1117/12.2546209

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Optical filters

Tolerancing

Gaussian beams

Gaussian filters

Optical components

Plasmonics

Beam analyzers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years