Paper
18 December 2019 Design of collimating optical system for high power array LED
Ye Wang, Chunshui Wang, JingYu Liu, GuLei Li
Author Affiliations +
Abstract
At present, LED is widely used as an illumination source. Because its spatial intensity is similar to lambertin distribution, the divergence angle of the beam is large, so that the light intensity of the LED source is rapidly attenuated as the propagation distance increases. Increasing the power of the LED light source will cause many LEDs to be packaged into a larger area chip, so that it is difficult to solve the beam uniformization and the collimated light by using a general collimating optical lens. In this paper, a collimated light system based on LED light source array is designed, which can produce a beam of collimated light from the high-power large-area LED, and low chromatic aberration occurs in the optical system. Such a light source optical system can be used as a super power parallel light source of many optical instruments such as an LED light source projector, a high power spotlight, a photographic illumination light source and the like. In the paper, optical design software zemax is used to optimize and design the optical lenses.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ye Wang, Chunshui Wang, JingYu Liu, and GuLei Li "Design of collimating optical system for high power array LED", Proc. SPIE 11334, AOPC 2019: Optoelectronic Devices and Integration; and Terahertz Technology and Applications, 1133417 (18 December 2019); https://doi.org/10.1117/12.2547744
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Optical design

Collimation

Light sources

Chromatic aberrations

Lens design

Image compression

RELATED CONTENT

LED source modeling and rayset generation from luminance maps
Proceedings of SPIE (September 12 2014)
Analysis of LED arrangement in an array with respect to...
Proceedings of SPIE (February 14 2018)
Design of stereoscopic display monitor for multi-users
Proceedings of SPIE (November 23 2011)
Glass Selection In Optical Design
Proceedings of SPIE (July 26 1985)
Study on optical design method for LED extended sources
Proceedings of SPIE (October 06 2010)

Back to Top