Poster + Paper
13 December 2020 Source position determination method of multiplexing lobster-eye optics
Author Affiliations +
Conference Poster
Abstract
The source position determination method of the multiplexing lobster-eye optics (MuLE), which is a newly proposed configuration of the Lobster-Eye (LE) optics to reduce the number of focal plane detectors significantly, was developed. In the MuLE configuration, X-rays came from different field-of-views (FoVs) were focused on a single imager. To separate the multiplexed FoVs, the optics was designed so that cross-like responses of LE mirror in different FoVs had different azimuthal rotation angles. In this paper, we show the method to determine the rotation angles and verify the FoV discrimination power by using a ray tracing simulation. The configuration we assumed in the simulation was nine multiplexed FoVs projecting onto a single imager (nine-segment MuLE optics) with a 30 cm focal length and a 9×9 cm2 effective area of each LE segment. One LE segment covers 9.6°× 9.6° FoV and the total FoV of the nine-segment MuLE configuration was 9 times of that. Our method provided 100% correct FoV discrimination at the 5σ detection limit flux (35–70 mCrab) for a transient source with a duration of 100 s except for the edge of the FoV.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Keisuke Uchiyama, Toru Tamagawa, Tatehiro Mihara, Yuanhui Zhou, Yuichiro Ezoe, Masaki Numazawa, Daiki Ishi, Ryota Otsubo, Aoto Fukushima, Tatsuya Yuasa, Hikaru Suzuki, Tomoki Uchino, Sae Sakuda, and Kumi Ishikawa "Source position determination method of multiplexing lobster-eye optics", Proc. SPIE 11444, Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray, 114447E (13 December 2020); https://doi.org/10.1117/12.2560427
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Multiplexing

Imaging systems

X-rays

Mirrors

Optical design

Sensors

X-ray imaging

RELATED CONTENT


Back to Top