Radiance uniformity measurement of a miniaturized integrating sphere light source for microscope radiance responsivity calibration

Yangting Fu; Xiangliang Liu; Yingwei He; Wende Liu; Nan Xu; Yandong Lin; Haiyong Gan

doi:10.1117/12.2580225

5 November 2020 Radiance uniformity measurement of a miniaturized integrating sphere light source for microscope radiance responsivity calibration

Yangting Fu, Xiangliang Liu, Yingwei He, Wende Liu, Nan Xu, Yandong Lin, Haiyong Gan

Author Affiliations +

Proceedings Volume 11567, AOPC 2020: Optical Sensing and Imaging Technology; 115673R (2020) https://doi.org/10.1117/12.2580225
Event: Applied Optics and Photonics China (AOPC 2020), 2020, Beijing, China

Abstract

An LED-based integrating sphere light source (LED-ISLS) was designed and fabricated for radiance responsivity calibration of microscopes. The LED-ISLS was composed of a miniaturized integrating sphere, an LED chip, a thin circular aperture, and was successfully applied to calibrate the radiance responsivity of a home-built microscope system. Several issues remain to be discussed. Firstly, the area of the circular aperture, which served as an exit port, was measured by comparing the light flux through an area-certified standard aperture and the circular aperture. The measurement uncertainty was smaller than 0.2%. Secondly, the radiance uniformity on the exit port was discussed. Simulations and experiments were conducted to evaluate the effects of circular aperture edge thickness and integrating sphere internal material reflection parameters on the radiance uniformity. From the simulation it was found out that as the edge thickness increases, the radiance uniformity drops drastically; the Bidirectional Reflectance Distribution Function (BRDF) also has impact on the radiance uniformity of the LED-ISLS. By reducing the BRDF from 0.9 to 0.6, the radiance uniformity at the exit port was reduced by about 63%. The radiance uniformity was also evaluated experimentally by using a 1 mm small aperture to scan the different small areas of the exit port. The radiance non-uniformity across the exit port of the LED-ISLS was about 5% from the scanning results. This work further investigated the radiance non-uniformity of the LED-ISLS and offered ideas of technical optimization of the LED-ISLS for better radiance responsivity calibration performance.

Citation Download Citation

Yangting Fu, Xiangliang Liu, Yingwei He, Wende Liu, Nan Xu, Yandong Lin, and Haiyong Gan "Radiance uniformity measurement of a miniaturized integrating sphere light source for microscope radiance responsivity calibration", Proc. SPIE 11567, AOPC 2020: Optical Sensing and Imaging Technology, 115673R (5 November 2020); https://doi.org/10.1117/12.2580225

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
5 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Calibration

Integrating spheres

Microscopes

Luminescence

Light sources

Microscopy

Sensors

Show All Keywords

Keywords/Phrases

Search In:

Publication Years