Paper
20 September 2022 Vibration source identification of aircraft wing based on the levels of human body vibration comfort at different locations
Hu Xu, Zhefeng Yu
Author Affiliations +
Proceedings Volume 12261, International Conference on Mechanical Design and Simulation (MDS 2022); 122613E (2022) https://doi.org/10.1117/12.2639203
Event: Second International Conference on Mechanical Design and Simulation (MDS 2022), 2022, Wuhan, China
Abstract
In order to locate vibration source caused by the wing fault through the human body feeling in the passenger cabin of the airplane, human comfort is selected as the evaluation index. Based on the method of evaluating human comfort according to ISO 2631-1-1997 standard, the response data of seats in the cabin of an aircraft under different vibration sources are analyzed. The human comfort of different seats under the excitation of horizontal tail, vertical tail, flap and aileron is obtained. The comfort level is divided into several grades according to the standard. The results show that for the excitation at the horizontal tail and vertical tail, the level distributions of human comfort at different seats is unique, so it can be used to judge the abnormal excitation at these two places. When the flaps and ailerons are excited, there is no such unique distribution in the comfort index of each position. The results of this paper can be used for on-line rapid identification of aircraft wing vibration sources.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hu Xu and Zhefeng Yu "Vibration source identification of aircraft wing based on the levels of human body vibration comfort at different locations", Proc. SPIE 12261, International Conference on Mechanical Design and Simulation (MDS 2022), 122613E (20 September 2022); https://doi.org/10.1117/12.2639203
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Standards development

Vibrometry

Finite element methods

Data analysis

Data conversion

Environmental sensing

Reliability

Back to Top