Fluid characteristics analysis and structure optimization in diaphragm compressor

Xiong-wei Liu; Jiny-an Tian; Ru-yi Chen; Jian-ming Jian

doi:10.1117/12.2682092

16 June 2023 Fluid characteristics analysis and structure optimization in diaphragm compressor

Xiong-wei Liu, Jiny-an Tian, Ru-yi Chen, Jian-ming Jian

Proceedings Volume 12639, Third International Conference on Mechanical Design and Simulation (MDS 2023); 126393K (2023) https://doi.org/10.1117/12.2682092
Event: Third International Conference on Mechanical Design and Simulation (MDS 2023), 2023, Xi'an, China

Abstract

To study the gas and liquid flow characteristics inside the diaphragm compressor and optimize the structure of the gas and oil chambers to improve the overall reliability of the machine, the CFD method was used to establish fluid models for the gas and oil chambers separately. The velocity and turbulence energy distribution of the gas chamber, as well as the pressure and flow velocity distribution of the oil chamber, were obtained. Various layout schemes for the gas and oil holes were optimized and compared. The results showed that the maximum flow velocity and turbulence energy of the gas chamber for scheme one were greater than those of the original design, but both decreased gradually for schemes ne to four. The centering of the distribution hole in the oil chamber had a significant effect on fluid characteristics, and the results from schemes one to four indicated that as the hole diameter increased, the maximum flow velocity and pressure gradually decreased. Additionally, under the condition of ensuring that local stresses were not too high, the fourth scheme was the optimal solution for both the gas and oil chambers. The maximum turbulence energy of the gas chamber decreased by 29.1% compared to the initial structure, and the maximum pressure and velocity of the oil chamber decreased by 35.5% and 71.5%, respectively.

Citation Download Citation

Xiong-wei Liu, Jiny-an Tian, Ru-yi Chen, and Jian-ming Jian "Fluid characteristics analysis and structure optimization in diaphragm compressor", Proc. SPIE 12639, Third International Conference on Mechanical Design and Simulation (MDS 2023), 126393K (16 June 2023); https://doi.org/10.1117/12.2682092

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available