Paper
25 October 2023 Numerical simulation of self-oscillating pulsed jet nozzle
Tiancan Dai, Chang Sun, Yuansheng Zhou, Xiang Xu
Author Affiliations +
Proceedings Volume 12801, Ninth International Conference on Mechanical Engineering, Materials, and Automation Technology (MMEAT 2023); 128015Y (2023) https://doi.org/10.1117/12.3007114
Event: Ninth International Conference on Mechanical Engineering, Materials, and Automation Technology (MMEAT 2023), 2023, Dalian, China
Abstract
This paper investigates effects of velocity and pressure fluctuation at the outlet of a self-excited oscillating water jet nozzle. First, a three-dimensional model of the self-excited oscillating nozzle is established for modal analysis, which identifies two favorable modes with corresponding natural frequencies of 268 Hz and 500 Hz. Subsequently, using the Transient Structural and Fluent modules in Workbench, a three-dimensional fluid-structure interaction model of the self-excited oscillating nozzle system is created. Different initial velocities are applied at the nozzle inlet, inlet along with disturbances at various frequencies of the velocity. Finally, a bidirectional fluid-structure coupling simulation is conducted on the model. Research findings indicate that significant velocity and pressure fluctuations occur at the outlet when the applied disturbance velocity frequency matches the natural frequencies of the nozzle system identified in the modal analysis, specifically 268 and 500 Hz. The best fluctuation effect is observed when the disturbance velocity frequency is 500 Hz, with the velocity fluctuation amplitude approximately 1.9 times that of 268 Hz and 7.4 times that without the disturbance velocity. Similarly, the pressure fluctuation amplitude is approximately 1.8 times that of 268 Hz and 7.2 times that without the disturbance velocity
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Tiancan Dai, Chang Sun, Yuansheng Zhou, and Xiang Xu "Numerical simulation of self-oscillating pulsed jet nozzle", Proc. SPIE 12801, Ninth International Conference on Mechanical Engineering, Materials, and Automation Technology (MMEAT 2023), 128015Y (25 October 2023); https://doi.org/10.1117/12.3007114
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nozzles

Modal analysis

Cavitation

Deformation

Numerical simulations

Vacuum chambers

Design and modelling

Back to Top