Presentation + Paper
12 March 2024 Single-frequency erbium-doped fiber amplifier with high energy gain at low repetition rates
Venkatapuram S. Sudarshanam, Cang Jin, Jeffrey W. Nicholson
Author Affiliations +
Abstract
We report pulse energy of 1.6 mJ at 1 kHz repetition rate from a single-frequency fiber amplifier with high energy gain of 19 dB at 1560 nm, using a 2.4 m long, Very-Large Mode Area (VLMA) Polarization-Maintaining (PM) erbium-doped fiber with 50 μm core diameter and absorption of 50 dB/m, core-pumped with a CW, 1480 nm Raman fiber laser. The in-pulse power fraction was 85%. The FWHM of the output pulses was 1.48 μs at 1 kHz repetition rate. At 150 Hz repetition rate, of interest in coherent wind LIDAR systems, we report 1 mJ, with energy gain of 17 dB, in-pulse power fraction of 72%, and FWHM of 1.24 μs. Stimulated Brillouin scattering limited the maximum energy reported here. The output of the fiber amplifier was diffraction limited, with mean beam quality factor, M2, of 1.04. The polarization extinction ratio exceeded 20 dB.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Venkatapuram S. Sudarshanam, Cang Jin, and Jeffrey W. Nicholson "Single-frequency erbium-doped fiber amplifier with high energy gain at low repetition rates", Proc. SPIE 12865, Fiber Lasers XXI: Technology and Systems, 1286507 (12 March 2024); https://doi.org/10.1117/12.2688232
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pulse signals

Fiber amplifiers

Fiber lasers

Single mode fibers

Continuous wave operation

Coherent optics

Erbium

Back to Top