Paper
24 November 2023 Laser cleaning of marble samples using picosecond laser at three different wavelengths
Wenzhe Hu, Chenyu Li, Guanyin Song, Xueyan Zhang, Shuzhen Nie, Liang Qu, Xiaolong Liu
Author Affiliations +
Proceedings Volume 12935, Fourteenth International Conference on Information Optics and Photonics (CIOP 2023); 129354A (2023) https://doi.org/10.1117/12.3007959
Event: Fourteenth International Conference on Information Optics and Photonics (CIOP 2023), 2023, Xi’an, China
Abstract
In order to remove the black pollution crusts on the marble artifacts, picosecond (ps) laser cleaning of marble samples has been performed experimentally at three different wavelengths (1064 nm, 532 nm, and 355 nm). Ablation threshold and cleaning efficiency of the three wavelength lasers have been characterized by measuring monolayer ablation depth with 3D microscope using the blow-off model. It has been found that laser ablation efficiency at 1064 nm wavelength is the highest among the above three wavelengths, while that of 355 nm wavelength is the lowest. The ablation threshold of 1064 nm, 532 nm, and 355 nm laser pulses are 0.198±0.033 J/cm2, 0.573±0.114 J/cm2 and 0.739±0.249 J/cm2 respectively. The advantages and effectiveness of ps laser cleaning have been demonstrated in removing contaminants on the marble samples at three different wavelengths, especially at 1064 nm.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Wenzhe Hu, Chenyu Li, Guanyin Song, Xueyan Zhang, Shuzhen Nie, Liang Qu, and Xiaolong Liu "Laser cleaning of marble samples using picosecond laser at three different wavelengths", Proc. SPIE 12935, Fourteenth International Conference on Information Optics and Photonics (CIOP 2023), 129354A (24 November 2023); https://doi.org/10.1117/12.3007959
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Picosecond phenomena

Contamination

Laser damage threshold

Microscopes

Statistical analysis

3D modeling

Back to Top