Paper
1 September 1991 Relative performance studies for focal-plane arrays
Kevin St. John Murphy, Derek J. Bradley, Peter N. J. Dennis
Author Affiliations +
Abstract
Recent years have seen increasing interest in PtSi infrared imaging systems. The performance and capabilities of a 5122 element PtSi imager have been assessed, and various figures of merit describing system linearity, spatial uniformity, and noise equivalent temperature are presented and contrasted with similar performance figures obtained from a 3-5 micrometers CMT system. The superior spatial uniformity and poorer thermal sensitivity of the PtSi imager is contrasted with the CMT system which generally exhibits poorer spatial uniformity but significantly higher thermal resolution. Trade-off studies between fixed-pattern noise and thermal resolution are discussed in terms of overall system performance for both imagers.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kevin St. John Murphy, Derek J. Bradley, and Peter N. J. Dennis "Relative performance studies for focal-plane arrays", Proc. SPIE 1488, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing II, (1 September 1991); https://doi.org/10.1117/12.45800
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Imaging systems

Minimum resolvable temperature difference

Sensors

Systems modeling

Staring arrays

Image resolution

Infrared imaging

RELATED CONTENT

Results of laboratory evaluation of staring arrays
Proceedings of SPIE (October 01 1990)
Simulation of sampling effects in FPAs
Proceedings of SPIE (September 01 1991)
Benefits of microscan for staring infrared imagers
Proceedings of SPIE (August 05 2004)
Post Focal Plane Processing For Staring IR Imagers
Proceedings of SPIE (February 18 1981)
Effects of pixel area versus number of pixels on FPA...
Proceedings of SPIE (October 01 1990)
Wide field camera 3 ground testing and calibration
Proceedings of SPIE (July 12 2008)

Back to Top