Paper
1 January 1992 Multilayer coatings on figured optics
Stephen P. Vernon, Daniel Gorman Stearns, Robert S. Rosen, Natale M. Ceglio, David P. Gaines, Michael K. Krumrey, Peter Mueller
Author Affiliations +
Abstract
Soft x-ray projection lithography (SXPL) requires uniform, high reflectivity multilayer (ML) coatings on figured optical surfaces with lens speeds (f) between 3 and 6 and diameters of 10 to 15 cm. High reflectivity Mo-Si ML coatings for operation near 13 nm were deposited on f 3.4 and f 6 optics 5 and 7.5 cm in diameter using planar dc magnetron sputtering. Measurements of the normal incidence reflectivity (NIR) of 63% at 13 nm uniform over the central 5 cm of the figured surface were obtained. Comparison of the measured values to model calculations of the wavelength dependent reflectivity indicate that the ML period is uniform to better than 0.04 nm over this region.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen P. Vernon, Daniel Gorman Stearns, Robert S. Rosen, Natale M. Ceglio, David P. Gaines, Michael K. Krumrey, and Peter Mueller "Multilayer coatings on figured optics", Proc. SPIE 1547, Multilayer Optics for Advanced X-Ray Applications, (1 January 1992); https://doi.org/10.1117/12.51268
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Optical coatings

X-ray optics

X-rays

Multilayers

Near infrared

Silicon

RELATED CONTENT

Damage-resistant and low stress EUV multilayer mirrors
Proceedings of SPIE (August 20 2001)
18- to 20-nm broadband multilayer at normal incidence
Proceedings of SPIE (July 18 2000)
Si-based multilayers with high thermal stability
Proceedings of SPIE (November 08 2000)
Control of Mo/Si multilayers for soft x-ray performance
Proceedings of SPIE (November 23 1999)

Back to Top