Real-time, simultaneous measurements of ink drop velocity and diameter in thermal ink-jet print head using laser scattering techniques

Chie C. Poon

doi:10.1117/12.2322230

1 May 1992 Real-time, simultaneous measurements of ink drop velocity and diameter in thermal ink-jet print head using laser scattering techniques

Chie C. Poon

Author Affiliations +

Proceedings Volume 1670, Color Hard Copy and Graphic Arts; (1992) https://doi.org/10.1117/12.2322230
Event: SPIE/IS&T 1992 Symposium on Electronic Imaging: Science and Technology, 1992, San Jose, CA, United States

Abstract

The velocity and diameter of ink drops are important parameters in ink-jet printing technology. They affect print quality and the control of the gray scale. We report here an exploratory experiment in which the velocity and diameter of drops from thermal ink-jet print heads were measured nonintrusively, simultaneously and in real time. A laser phase Doppler particle analyzer was used in the experiment. The velocity was deduced from the Doppler signal and the diameter from the spatial phase difference of the scattered intensity. From an analysis using geometrical optics, it was determined that the optimum condition for sizing absorbing spheres such as ink drops was that the signal detected be limited to externally reflected rays. The intensity of rays refracted as a fraction of rays reflected by ink drops could vary significantly over their size range and compounded size interpretation. By considering the scattered intensity, the analysis showed that the best placement of the detectors for the present application was at 90° scattering angle, using a perpendicularly polarized light source. In this configuration, twice refracted rays (no internal reflection) were absent. The detected signal was dominated by externally reflected rays. In order to measure ink drop diameter accurately, the complex refractive index m of several ink-jet inks was measured. A typical value was m = 1.37 — i 0.0049 at 0.6328?m wavelength. Monodisperse droplets produced with a piezo-electric squeeze tube drop generator were used to calibrate the instrument. With the optimized configuration the drop velocity and diameter of two commercial thermal ink-jet heads and an experimental prototype were measured.

Citation Download Citation

Chie C. Poon "Real-time, simultaneous measurements of ink drop velocity and diameter in thermal ink-jet print head using laser scattering techniques", Proc. SPIE 1670, Color Hard Copy and Graphic Arts, (1 May 1992); https://doi.org/10.1117/12.2322230

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Head

Scattering

Polarization

Refractive index

Refraction

Particles

Signal detection

Show All Keywords

Keywords/Phrases

Search In:

Publication Years