Paper
25 February 1993 Diamond for high heat flux applications
Clifford J. Robinson, Thomas M. Hartnett, Richard P. Miller, Charles B. Willingham, John E. Graebner, Donald T. Morelli
Author Affiliations +
Abstract
In polycrystalline CVD diamond of useful macroscopic dimensions, which may be considered for high heat flux applications, thermal conductivity parameters are largely determined by grain size resulting from growth morphology, defects and impurities in the material. Thermal conductivity has been measured in a number of state-of-the-art diamond samples, by the steady state technique, over the temperature range 6 to 400 K. The results are presented, and discussed in terms of microstructural differences between samples. At approximately 30 K, a departure from normal Debye type behavior is observed as a lowering of the predicted conductivity. At higher temperatures, this departure becomes less significant so that above approximately 350 K, where only Umklapp processes contribute to phonon scattering, the measured thermal conductivity is close to that predicted by the model and in good agreement with reference data for natural type IIa single crystal diamond. To account for the observed temperature dependence of conductivity, an additional phonon scattering term is used which may be described as Rayleigh scattering at low temperature by defects of 0.7 to 1.3 nm in size.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Clifford J. Robinson, Thomas M. Hartnett, Richard P. Miller, Charles B. Willingham, John E. Graebner, and Donald T. Morelli "Diamond for high heat flux applications", Proc. SPIE 1739, High Heat Flux Engineering, (25 February 1993); https://doi.org/10.1117/12.140491
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diamond

Chemical vapor deposition

Scattering

Phonons

Polishing

Rayleigh scattering

Surface finishing

RELATED CONTENT

Pushing the boundaries of high power lasers low loss,...
Proceedings of SPIE (February 20 2018)
Optical Properties Of Microcrystalline CVD Diamond
Proceedings of SPIE (September 11 1989)
Polishing of filament-assisted CVD diamond films
Proceedings of SPIE (December 01 1991)
Bulk diamond for IR/rf windows and domes
Proceedings of SPIE (June 27 1997)
Diamond films for IR optical applications
Proceedings of SPIE (October 01 1990)

Back to Top