Reflection grating arrays for the Reflection Grating Spectrometer on board XMM

Steven M. Kahn; Jean Cottam; Todd A. Decker; Frits B. S. Paerels; Steven M. Pratuch; Andrew P. Rasmussen; Joshua Spodek; Jay V. Bixler; A. C. Brinkman; Jan-Willem den Herder; Christian Erd

doi:10.1117/12.256008

31 October 1996 Reflection grating arrays for the Reflection Grating Spectrometer on board XMM

Steven M. Kahn, Jean Cottam, Todd A. Decker, Frits B. S. Paerels, Steven M. Pratuch, Andrew P. Rasmussen, Joshua Spodek, Jay V. Bixler, A. C. Brinkman, Jan-Willem den Herder, Christian Erd

Author Affiliations +

Proceedings Volume 2808, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy VII; (1996) https://doi.org/10.1117/12.256008
Event: SPIE's 1996 International Symposium on Optical Science, Engineering, and Instrumentation, 1996, Denver, CO, United States

Abstract

The reflection grating spectrometer (RGS) on-board the x-ray multi-mirror (XMM) mission incorporates an array of reflection gratings oriented at grazing incidence in the x- ray optical path immediately behind a grazing incidence telescope. Dispersed light is imaged on a strip of CCD- detectors slightly offset from the telescope focal plane. The grating array picks off roughly half the light emanating from the telescope; the other half passes undeflected through the array where it is imaged by the European photon imaging camera (EPIC) experiment. XMM carries two such identical units, plus a third telescope with an EPIC detector, but no RGS. The basic elements of the RGA include: 202 identical reflection gratings, a set of precision rails with bosses that determine the position and alignment of each grating, a monolithic beryllium integrating structure on which the rails are mounted, and a set of three, kinematic support mounts which fix the array to the telescope. In this paper, we review our progress on the fabrication and testing of the RGA hardware, with particular attention to the components comprising the engineering qualification model, a flight-representative prototype which will be completely assembled in September of this year.

Citation Download Citation

Steven M. Kahn, Jean Cottam, Todd A. Decker, Frits B. S. Paerels, Steven M. Pratuch, Andrew P. Rasmussen, Joshua Spodek, Jay V. Bixler, A. C. Brinkman, Jan-Willem den Herder, and Christian Erd "Reflection grating arrays for the Reflection Grating Spectrometer on board XMM", Proc. SPIE 2808, EUV, X-Ray, and Gamma-Ray Instrumentation for Astronomy VII, (31 October 1996); https://doi.org/10.1117/12.256008

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE