EMAT weld inspection and weld machine diagnostic system for continuous coil processing lines

Wayne M. Latham; Daniel T. MacLauchlan; Dan P. Geier; Dennis D. Lang

doi:10.1117/12.259206

15 November 1996 EMAT weld inspection and weld machine diagnostic system for continuous coil processing lines

Wayne M. Latham, Daniel T. MacLauchlan, Dan P. Geier, Dennis D. Lang

Author Affiliations +

Proceedings Volume 2948, Nondestructive Evaluation for Process Control in Manufacturing; (1996) https://doi.org/10.1117/12.259206
Event: Nondestructive Evaluation Techniques for Aging Infrastructure and Manufacturing, 1996, Scottsdale, AZ, United States

Abstract

Weld breaks of steel coil during cold rolling and continuous pickling operations are a significant source of lost productivity and product yield. Babcock and Wilcox Innerspec Technologies has developed a weld process control system which monitors the key variables of the welding process and determines the quality of the welds generated by flash butt welding equipment. This system is known as the Temate 2000 Automated Flash Butt Weld Inspection and Weld Machine Diagnostic System. The Temate 2000 system utilizes electro- magnetic acoustic transducer (EMAT) technology as the basis for performing on-line, real-time, nondestructive weld quality evaluation. This technique accurately detects voids, laps, misalignment and over/under trim conditions in the weld. Results of the EMAT weld inspection are immediately presented to the weld machine operator for disposition. Welding process variables such as voltage, current, platen movements and upset pressures are monitored and collected with the high speed data acquisition system. This data is processed and presented in real-time display to indicate useful welding process information such as platen crabbing, upset force, peak upset current, and many others. Alarming for each variable is provided and allows detailed maintenance reports and summary information to be generated. All weld quality and process parameter data are stored, traceable to each unique weld, and available for post process evaluation. Installation of the Temate 2000 system in a major flat rolled steel mill has contributed to near elimination of weld breakage and increased productivity at this facility.

Citation Download Citation

Wayne M. Latham, Daniel T. MacLauchlan, Dan P. Geier, and Dennis D. Lang "EMAT weld inspection and weld machine diagnostic system for continuous coil processing lines", Proc. SPIE 2948, Nondestructive Evaluation for Process Control in Manufacturing, (15 November 1996); https://doi.org/10.1117/12.259206

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE