Paper
27 October 1999 MTI focal plane assembly design and performance
Jeffrey L. Rienstra, Mary Ballard
Author Affiliations +
Abstract
The focal plane assembly for the Multispectral Thermal Imager (MTI) consists of sensor chip assemblies, optical filters, and a vacuum enclosure. Sensor chip assemblies, composed of linear detector arrays and readout integrated circuits, provide spatial resolution in the cross-track direction for the pushbroom imager. Optical filters define 15 spectral bands in a range from 0.45 micrometer to 10.7 micrometer. All the detector arrays are mounted on a single focal plane and are designed to operate at 75 K. Three pairs of sensor chip assemblies (SCAs) are required to provide cross-track coverage in all 15 spectral bands. Each pair of SCAs includes detector arrays made from silicon, indium antimonide, and mercury cadmium telluride. Readout integrated circuits multiplex the signals from the detectors to 18 separate video channels. Optical filter assemblies defining the spectral bands are mounted over the linear detector arrays. Each filter assembly consists of several filter strips bonded together side-by- side. The MTI focal plane assembly has been integrated with the rest of the payload and has undergone detailed testing and calibration. This paper includes representative test data for the various spectral bands and the overall performance of the focal plane assembly.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jeffrey L. Rienstra and Mary Ballard "MTI focal plane assembly design and performance", Proc. SPIE 3753, Imaging Spectrometry V, (27 October 1999); https://doi.org/10.1117/12.366299
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Optical filters

Detector arrays

Readout integrated circuits

Staring arrays

Telescopes

Long wavelength infrared

RELATED CONTENT

A Long Wave Infrared (LWIR) spectral imager (7.7 to 12.3...
Proceedings of SPIE (October 25 2013)
NPOESS VIIRS sensor design overview
Proceedings of SPIE (January 18 2002)
SABER instrument design update
Proceedings of SPIE (September 29 1995)
State of the art MCT IR modules with enhanced long...
Proceedings of SPIE (May 31 2012)

Back to Top