Paper
27 April 2000 Mitigation of seismic pounding effect on bridges using dynamic restrainers
Masanobu Shinozuka, Maria Qing Feng, Je-Min Kim, Fumio Nagashima, HoKyung Kim
Author Affiliations +
Abstract
The present paper proposes the retrofit use of dynamic restrainers at the expansion joint for preventing the collapse of bridges in the event of a severe earthquake. The proposed dynamic restrainer consists of a nonlinear viscous damper and an elastic spring connected in parallel. Two-dimensional nonlinear finite element analysis using bilinear hysteretic models for RC bridge substructure joints and nonlinear gap elements for expansion joints is performed on example bridges with one or two expansion joints. The numerical simulation study indicates that the dynamic restrainers are substantially effective in reducing the relative opening displacements and impact forces due to pounding at the expansion joints. It is also found that the dynamic restrainer can be installed at expansion joint in abutment as well as between adjacent bridge frames to avoid a possible increase of ductility demands in the bridge substructures.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masanobu Shinozuka, Maria Qing Feng, Je-Min Kim, Fumio Nagashima, and HoKyung Kim "Mitigation of seismic pounding effect on bridges using dynamic restrainers", Proc. SPIE 3989, Smart Structures and Materials 2000: Damping and Isolation, (27 April 2000); https://doi.org/10.1117/12.384579
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bridges

Earthquakes

Electroluminescence

Civil engineering

Numerical simulations

Finite element methods

Motion models

Back to Top