Paper
14 November 2001 Development of plasma chemical vaporization machining and elastic emission machining systems for coherent x-ray optics
Yuzo Mori, Y. Yamauchi, Kazuya Yamamura, Hidekazu Mimura, A. Saito, H. Kishimoto, Y. Sekito, Masahiko Kanaoka, Alexei Souvorov, Makina Yabashi, Kenji Tamasaku, Tetsuya Ishikawa
Author Affiliations +
Abstract
Plasma CVM (chemical vaporization machining) and EEM (elastic emission machining) systems were developed for coherent X-ray optics fabrication. Figure-correction performances were tested in the spatial wavelength range from submillimeter to several hundreds mm, and those processes were certified to be promising technique to fabricate next-generation mirrors for coherent X-ray beams. A wave-optics simulation code was also developed to feed scientific analysis back to the fabrication technology. A figure measurement technique was also proposed to satisfy the suggestions from the wave-optics simulations. Simulated results indicated the necessity of the figure measurement with subnanometer accuracy having lateral resolution more than submillimeter.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuzo Mori, Y. Yamauchi, Kazuya Yamamura, Hidekazu Mimura, A. Saito, H. Kishimoto, Y. Sekito, Masahiko Kanaoka, Alexei Souvorov, Makina Yabashi, Kenji Tamasaku, and Tetsuya Ishikawa "Development of plasma chemical vaporization machining and elastic emission machining systems for coherent x-ray optics", Proc. SPIE 4501, X-Ray Mirrors, Crystals, and Multilayers, (14 November 2001); https://doi.org/10.1117/12.448496
Lens.org Logo
CITATIONS
Cited by 49 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Plasma

Electrodes

X-rays

Head

Surface finishing

Control systems

Back to Top