Analysis and structure design of distributed-feedback laser (DFB) and distributed Bragg reflector (DBR) laser using regrowth-free surface grating technology

Hery Susanto Djie; Chrisada Sookdhis; Philip Dowd

doi:10.1117/12.446552

29 October 2001 Analysis and structure design of distributed-feedback laser (DFB) and distributed Bragg reflector (DBR) laser using regrowth-free surface grating technology

Hery Susanto Djie, Chrisada Sookdhis, Philip Dowd

Author Affiliations +

Proceedings Volume 4594, Design, Fabrication, and Characterization of Photonic Devices II; (2001) https://doi.org/10.1117/12.446552
Event: International Symposium on Photonics and Applications, 2001, Singapore, Singapore

Abstract

The realization of single-mode Distributed Feedback (DFB) and Distributed Bragg Reflector (DBR) lasers, based on surface grating structures is of considerable interest. Such devices offer a relatively simple grating fabrication process without complicated multistep-epitaxial growth or regrowth, as required in more conventional devices. This simplified processing could potentially reduce the fabrication cost for these lasers. A key concern for the surface grating lasers is designing the structure to provide sufficient feedback to achieve single mode operation with high yield and high quality as compared to conventional buried-grating DFB and DBR lasers. This paper reports numerical modelling of surface grating DFB and DBR lasers based on 1.55 micrometers wavelength InGaAs/InGaAsP/InP with graded-index separate confinement heterostructure multiple quantum well (GRINSCH-MQW) structures. Bragg wavelength operation of the DFB and DBR lasers may be satisfied by deeply etching fine surface gratings on both side portions and along top of the ridge stripe respectively. Sufficiently strong optical coupling between the corrugated structure and evanescent field can be achieved by controlling various parameters such as ridge width, etch depth, and grating width. The numerical results obtained allow optimum grating geometries to be developed to provide the desired feedback effect. Furthermore, the model has been used to investigate the influence on the device performance of fabrication errors and processing effects on the grating structures, prior to fabrication.

Citation Download Citation

Hery Susanto Djie, Chrisada Sookdhis, and Philip Dowd "Analysis and structure design of distributed-feedback laser (DFB) and distributed Bragg reflector (DBR) laser using regrowth-free surface grating technology", Proc. SPIE 4594, Design, Fabrication, and Characterization of Photonic Devices II, (29 October 2001); https://doi.org/10.1117/12.446552

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE