Underwater cutting technology of thick stainless steel with YAG laser

Itaru Chida; Koki Okazaki; Seishi Shima; Kenji Kurihara; Yasuhiro Yuguchi; Ikuko Sato

doi:10.1117/12.497715

3 March 2003 Underwater cutting technology of thick stainless steel with YAG laser

Itaru Chida, Koki Okazaki, Seishi Shima, Kenji Kurihara, Yasuhiro Yuguchi, Ikuko Sato

Proceedings Volume 4831, First International Symposium on High-Power Laser Macroprocessing; (2003) https://doi.org/10.1117/12.497715
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan

Abstract

In nuclear power plants, irradiated materials like Control Rod (CR) should be stored underwater after service. Due to reducing the storage space, underwater cutting technology is expected. In this study, we developed underwater cutting technology of thick stainless steel with YAG laser in order to cut used CR. Preliminary tests were performed with flat plate test-pieces to optimize the cutting conditions. Due to creating a local dry area between nozzle and test-piece, high-pressure air was blown from the nozzle. Underwater laser cutting was carried out by laser irradiation power of 4 kW, changing the parameters of cutting speed, distance between the nozzle and test-piece, and thickness of the test-piece. We also investigated the wastes like dross and aerosols by laser cutting. Amount of dross was approximately 0.1 kg/m after cutting a 14 mm thick stainless steel plate, which is estimated to be less than other cutting method. Based on these results, we developed underwater cutting system of CR test-piece with YAG laser as a mock-up test. In the cutting torch, there was tracking system was introduced to keep the distance between the nozzle and the test-piece constant, and cutting monitor was also set-in to detect whether the test-piece was successfully cut or not. We have already tried to cut the CR test-piece with this facility and successfully cut in half.

Citation Download Citation

Itaru Chida, Koki Okazaki, Seishi Shima, Kenji Kurihara, Yasuhiro Yuguchi, and Ikuko Sato "Underwater cutting technology of thick stainless steel with YAG laser", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); https://doi.org/10.1117/12.497715

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available