High-performance 6-in. EUV mask blanks produced under real production conditions by ion-beam sputter deposition

Hans Willy Becker; Frank Sobel; Lutz Aschke; Markus Renno; Juergen Krieger; Ute Buttgereit; Guenter Hess; Frank Lenzen; Konrad Knapp; Sergey A. Yulin; Torsten Feigl; Thomas Kuhlmann; Norbert Kaiser

doi:10.1117/12.467578

27 December 2002 High-performance 6-inch EUV mask blanks produced under real production conditions by ion-beam sputter deposition

Hans Willy Becker, Frank Sobel, Lutz Aschke, Markus Renno, Juergen Krieger, Ute Buttgereit, Guenter Hess, Frank Lenzen, Konrad Knapp, Sergey A. Yulin, Torsten Feigl, Thomas Kuhlmann, Norbert Kaiser

Author Affiliations +

Proceedings Volume 4889, 22nd Annual BACUS Symposium on Photomask Technology; (2002) https://doi.org/10.1117/12.467578
Event: Photomask Technology 2002, 2002, Monterey, CA, United States

Abstract

EUV mask blanks consist of two thin film systems deposited on low thermal expansion 6 inch substrates (LTEM). First there is the multilayer stack with around 100 alternating layers of elements with different optical properties which are topped by a capping layer. The absorber stack which consists of a buffer and a absorber layer is next. Here a minimum absorption of EUV light of 99 % is required. The stress in both layer systems should be as low as possible. The reduction of defects to an absolute minimum is one of the main challenges. The high-reflective Mo/Si multilayer coatings were designed for normal incidence reflectivity and successfully deposited on 6-inch LTEM substrates by ion-beam sputtering. X-ray scattering, transmission electron microscopy and atomic force microscopy were used for characterization of the multilayer interfaces and the surface morphology. The results are correlated to the measured normal incidence reflectivity using synchrotron radiation at the "Physikalisch- Technischen Bundesanstalt" (PTB) refelctometer at BESSY II, Berlin, Germany. A high resolution laser scanner was used to measure the particle distribution. First multilayer defect results are presented.

Citation Download Citation

Hans Willy Becker, Frank Sobel, Lutz Aschke, Markus Renno, Juergen Krieger, Ute Buttgereit, Guenter Hess, Frank Lenzen, Konrad Knapp, Sergey A. Yulin, Torsten Feigl, Thomas Kuhlmann, and Norbert Kaiser "High-performance 6-inch EUV mask blanks produced under real production conditions by ion-beam sputter deposition", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.467578

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE