Design for reliability of drift-free MEMS micromirrors

Herbert R. Shea; Arman Gasparyan

doi:10.1117/12.549111

16 August 2004 Design for reliability of drift-free MEMS micromirrors

Herbert R. Shea, Arman Gasparyan

Author Affiliations +

Proceedings Volume 5455, MEMS, MOEMS, and Micromachining; (2004) https://doi.org/10.1117/12.549111
Event: Photonics Europe, 2004, Strasbourg, France

Abstract

The rapid commercialization and long-term reliability of optical MEMS is greatly facilitated by a Design-for-Reliability mindset, relying on an interdependent development framework simultaneously optimizing design, materials choices, processing, reliability, subsystem design, and packaging. Even with the best mechanical design, the electrical design and packaging choices of these devices has a large impact both on performance (e.g., speed and stability) and on reliability (e.g., corrosion and dielectric or gas breakdown). In this paper we discuss the reliability and performance of two-axis MEMS micromirrors and present several design, processing and packaging steps that were needed to achieve open-loop drift-free operation and mean-time-to-failure in excess of 2000 years. In particular the relationship between leakage currents and the accumulation of quasi-static charge in dielectrics are discussed, along with several techniques to mitigate charging and the associated drift in electrostatically actuated or sensed MEMS devices. Two key parameters are shown to be the electrode geometry and the conductivity of the dielectric. Electrical breakdown in sub-micron gaps is presented as a function of packaging gas and electrode spacing. We discuss the trade-offs involved in choosing gap geometries, dielectric properties, and packaging solutions. Finally galvanic corrosion of poly-silicon in HF release etch baths is discussed along with techniques to minimize this corrosion.

Citation Download Citation

Herbert R. Shea and Arman Gasparyan "Design for reliability of drift-free MEMS micromirrors", Proc. SPIE 5455, MEMS, MOEMS, and Micromachining, (16 August 2004); https://doi.org/10.1117/12.549111

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE