Evaluation of dry etching and defect repair of EUVL mask absorber layer

Tsukasa Abe; Masaharu Nishiguchi; Tsuyoshi Amano; Toshiaki Motonaga; Shiho Sasaki; Hiroshi Mohri; Naoya Hayashi; Yuusuke Tanaka; Iwao Nishiyama

doi:10.1117/12.569397

6 December 2004 Evaluation of dry etching and defect repair of EUVL mask absorber layer

Tsukasa Abe, Masaharu Nishiguchi, Tsuyoshi Amano, Toshiaki Motonaga, Shiho Sasaki, Hiroshi Mohri, Naoya Hayashi, Yuusuke Tanaka, Iwao Nishiyama

Author Affiliations +

Proceedings Volume 5567, 24th Annual BACUS Symposium on Photomask Technology; (2004) https://doi.org/10.1117/12.569397
Event: Photomask Technology, 2004, Monterey, California, United States

Abstract

EUVL mask process of absorber layer, buffer layer dry etching and defect repair were evaluated. TaGeN and Cr were selected for absorber layer and buffer layer, respectively. These absorber layer and buffer layer were coated on 6025 Qz substrate. Two dry etching processes were evaluated for absorber layer etching. One is CF4 plasma process and the other is Cl2 plasma process. Etch bias uniformity, selectivity, cross section profile and resist damage were evaluated for each process. Disadvantage of CF4 plasma process is low resist selectivity and Cl2 plasma process is low Cr selectivity. CF4 plasma process caused small absorber layer damage on isolate line and Cl2 plasma process caused Cr buffer layer damage. To minimize these damages overetch time was evaluated. Buffer layer process was also evaluated. Buffer layer process causes capping layer damage. Therefore, etching time was optimized. FIB-GAE and AFM machining were applied for absorber layer repair test. XeF2 gas was used for FIB-GAE. Good selectivity between absorber layer and buffer layer was obtained using XeF2 gas. However, XeF2 gas causes side etching of TaGeN layer. AFM machining repair technique was demonstrated for TaGeN layer repair.

Citation Download Citation

Tsukasa Abe, Masaharu Nishiguchi, Tsuyoshi Amano, Toshiaki Motonaga, Shiho Sasaki, Hiroshi Mohri, Naoya Hayashi, Yuusuke Tanaka, and Iwao Nishiyama "Evaluation of dry etching and defect repair of EUVL mask absorber layer", Proc. SPIE 5567, 24th Annual BACUS Symposium on Photomask Technology, (6 December 2004); https://doi.org/10.1117/12.569397

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE