Automatic MTF measurement through a least square method

Christophe Latry; Vincent Despringre; Christophe Valorge

doi:10.1117/12.564796

4 November 2004 Automatic MTF measurement through a least square method

Christophe Latry, Vincent Despringre, Christophe Valorge

Proceedings Volume 5570, Sensors, Systems, and Next-Generation Satellites VIII; (2004) https://doi.org/10.1117/12.564796
Event: Remote Sensing, 2004, Maspalomas, Canary Islands, Spain

Abstract

The Modulation Transfer Function (MTF) is a major parameter for high resolution optical remote sensing systems, indicating how spatial frequencies are transmitted and weakened by the imaging global chain. Assessing MTF is thus a very important task during both the in-flight commissioning period and the routine monitoring phases. Classical in flight MTF measurement methods are based upon devoted well known patterns such as knife edge patterns. These techniques induce heavy constraints upon satellite payload programming taking into account nebulosity conditions and pattern ground maintenance. Moreover, for high MTF systems, MTF assessment proves to be difficult because the point spread function has a too reduced extension. Another solution consists in taking two images of the same scene, one in a high resolution mode and the other one in a lower resolution mode. When the resolution ratio is high enough (typically higher then 3), it is possible to simulate the lower resolution image through convolution with a filter and undersampling. The least square method consists in an iterative process, according to which the convolution filter evolves in order to minimize a least square criterion measuring the difference between the simulation and the low resolution image. Once the process has converged, taking the Fourier Transform of the convolution filter gives an estimation of the ratio between low resolution image MTF versus high resolution image MTF. This method may be successfully applied to remote sensing systems such as Quickbird, Ikonos, SPOT5 and future PLEIADES-HR to assess MTF in the multispectral mode. The goal of this paper is to present the MTF assessment method, the way it was validated through simulations and its application within SPOT5 context.

Citation Download Citation

Christophe Latry, Vincent Despringre, and Christophe Valorge "Automatic MTF measurement through a least square method", Proc. SPIE 5570, Sensors, Systems, and Next-Generation Satellites VIII, (4 November 2004); https://doi.org/10.1117/12.564796

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available