Paper
31 January 2005 Simulation of InP-based monolithically integrated PIN-HEMT front-end optical receiver
Sheng Xie, Chao Chen, Jian-Tao Bian
Author Affiliations +
Abstract
Model is developed for the dc I-V characteristics and microwave small-signal parameters of the InP-based In0.52Al0.28As/In0.65Ga0.35As HEMT’s based on physical principles, and the effect of the extrinsic source and drain resistances has also been included. Using the parameters obtained by this model and the small-signal model of PIN detector, we simulated the transimpedance configurations with an inverter and a cascode input circuit of monolithically integrated PIN-HEMT front-end optical receiver. The results indicate that the cascode input stage can realize a smaller input capacitance than the inverter-type, so it has a wider bandwidth. In order to operate in 2.5Gb/s transmission system, the cascode input stage is applied and the parameters are optimized. The simulations reveal that the transimpedance gain is larger than 63.2dBΩ and the sensitivity is 30dBm when the bit rate is 2.5Gb/s. The results obtained in this paper provide a guideline for the fabrication of PIN-HEMT optical receiver.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sheng Xie, Chao Chen, and Jian-Tao Bian "Simulation of InP-based monolithically integrated PIN-HEMT front-end optical receiver", Proc. SPIE 5624, Semiconductor and Organic Optoelectronic Materials and Devices, (31 January 2005); https://doi.org/10.1117/12.575448
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Receivers

Field effect transistors

Capacitance

Integrated optics

Resistance

Aluminum

Gallium

Back to Top