Evaluation of Hitachi CAD to CD-SEM metrology package for OPC model tuning and product devices OPC verification

Pietro Cantu; Gianfranco Capetti; Chiara Catarisano; Fabrizio D'Angelo; Elena Evangelista; Ermes Severgnini; Silvia Trovati; Mauro Vasconi; Takumichi Sutani; Stephan Wahl; Robert Steffen

doi:10.1117/12.601909

10 May 2005 Evaluation of Hitachi CAD to CD-SEM metrology package for OPC model tuning and product devices OPC verification

Pietro Cantu, Gianfranco Capetti, Chiara Catarisano, Fabrizio D'Angelo, Elena Evangelista, Ermes Severgnini, Silvia Trovati, Mauro Vasconi, Takumichi Sutani, Stephan Wahl, Robert Steffen

Author Affiliations +

Proceedings Volume 5752, Metrology, Inspection, and Process Control for Microlithography XIX; (2005) https://doi.org/10.1117/12.601909
Event: Microlithography 2005, 2005, San Jose, California, United States

Abstract

Optical proximity corrections are widely used in semiconductor industry to compensate non-linear effects occurring when printing features smaller than exposure wavelength. Most advanced OPC software packages simulate optical behavior starting from a physical description of illumination and projection optics, while the characterization of resist development and etch loading effects is still performed empirically, with different approaches that, generally, require the collection of a huge amount of experimental data. Due to the wide variety of target patterns, which makes conventional CD-SEM recipe creation impossible, critical dimension (CD) measurements are usually performed manually, requiring long time and, despite the attention paid while measuring, with poor guarantee of repeatability. The introduction of 193nm resists, much more sensitive to SEM e-beam exposure if compared to 248nm materials, required increased attention to be paid on both focusing and measuring phases in order to obtain reliable results. As well as OPC model tuning, the verification of correction effectiveness on product devices is performed almost in the same way leading to the same kind of issues. In order to overcome most of these problems ST is evaluating a new CD metrology package from Hitachi High Technologies; this tool allows fully automatic CD measurements starting from GDS II coordinate input. The exact recognition of measurement locations is obtained through an algorithm, based on the superposition of the drawn GDS II layout to the SEM wafer images, which allows achieving high positioning accuracy. The introduction of the tool significantly reduces measuring time down to the range of normal automated CD measurement times, while guarantying improved repeatability and optimized conditions even with 193nm resists due to the possibility of defining different structures for addressing and focusing before the measurement. This new system opens new perspectives in OPC modeling giving the opportunity of a more accurate model tuning, required by 65 nm technology node, and enables an extensive product devices OPC verification presently impossible due to time and procedure issues.

Citation Download Citation

Pietro Cantu, Gianfranco Capetti, Chiara Catarisano, Fabrizio D'Angelo, Elena Evangelista, Ermes Severgnini, Silvia Trovati, Mauro Vasconi, Takumichi Sutani, Stephan Wahl, and Robert Steffen "Evaluation of Hitachi CAD to CD-SEM metrology package for OPC model tuning and product devices OPC verification", Proc. SPIE 5752, Metrology, Inspection, and Process Control for Microlithography XIX, (10 May 2005); https://doi.org/10.1117/12.601909

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE