Characterization of the solvent-induced nonlinear response of ionic polymer actuators

Curt S. Kothera; Donald J. Leo

doi:10.1117/12.598474

19 May 2005 Characterization of the solvent-induced nonlinear response of ionic polymer actuators

Curt S. Kothera, Donald J. Leo

Author Affiliations +

Proceedings Volume 5757, Smart Structures and Materials 2005: Modeling, Signal Processing, and Control; (2005) https://doi.org/10.1117/12.598474
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2005, San Diego, California, United States

Abstract

Ionic polymer transducers exhibit coupling between the electrical, chemical, and mechanical domains, allowing their use as both sensors and actuators. Because of their compliance, light weight, and low voltage operation, ionic polymers have spawned an area of much research, although their fundamental mechanisms are still open for debate. While most of the existing models provide linear, dynamic approximations of the response, nonlinear characteristics have been observed experimentally. Some of these include the introduction of permanent strain in the step response and distortion in the forced response to harmonic excitations. Recent experimental results have shown that the solvent plays a significant role in the dynamic response of ionic polymer actuators. Given a single-frequency input voltage, the major difference from changing solvent materials was concluded to be a nonlinear distortion with varying influence, seen in both the actuation current and tip velocity measurements. These results compared the response of a water-based sample to a sample prepared with the ionic liquid EMI-Tf, where it was found that the voltage-to-current relationship was much more nonlinear in the water sample, while it was predominantly linear with the ionic liquid sample. This research looks to further explore this nonlinear distortion by incorporating a larger set of candidate solvent materials and investigating the impact of how changing properties affect the overall response. System identification techniques using the Volterra series are employed to aid in the characterization of the harmonic distortion. The knowledge gained in this study will provide useful information about the nature of the nonlinearity and some of the factors that affect its relative influence, which will assist physical model development.

Citation Download Citation

Curt S. Kothera and Donald J. Leo "Characterization of the solvent-induced nonlinear response of ionic polymer actuators", Proc. SPIE 5757, Smart Structures and Materials 2005: Modeling, Signal Processing, and Control, (19 May 2005); https://doi.org/10.1117/12.598474

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE