Paper
12 July 2007 Near-surface sensitivity suppression way for diffuse reflective optical tomography: simulation and a phantom study
Author Affiliations +
Abstract
Diffuse reflective optical measurement is a useful approach for monitoring the oxygen consumption of living tissue such as brain and muscle. To improve the oxygen consumption measurement accuracy, we propose a method for suppressing the near-surface sensitivity. Diffuse reflective light is detected at the aperture used for irradiating the light and is used as a cancellation signal for near-field sensitivity in the conventional measurement scheme. Photon fluence density functions and positional dependences of detected light sensitivity to change in absorbance were simulated. The sensitivity detected at the same position (aperture) as irradiation was significantly high for the near-surface region. With our method, the near-surface sensitivity is reduced by more than 90% while keeping target sensitivity almost constant (only 3% deterioration). The near-surface and deep-field sensitivity was measured with a phantom with light (785 nm) modulated at 1 kHz through an optical fiber bundle. It confirmed suppressed the near-surface sensitivity by subtracting the light detected at the same aperture from the light detected at another aperture.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Keiko Fukuda and Mamiko Fujii "Near-surface sensitivity suppression way for diffuse reflective optical tomography: simulation and a phantom study", Proc. SPIE 6629, Diffuse Optical Imaging of Tissue, 662907 (12 July 2007); https://doi.org/10.1117/12.729461
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Monte Carlo methods

Reflectivity

Signal detection

Diffusion

Sensors

Tissue optics

Back to Top