Design of asymmetrically loaded end-plates with vacuum seal surfaces for the Navy Prototype Optical Interferometer

Joshua P. Walton; James H. Clark III; F. Ernesto Penado

doi:10.1117/12.733962

17 September 2007 Design of asymmetrically loaded end-plates with vacuum seal surfaces for the Navy Prototype Optical Interferometer

Joshua P. Walton, James H. Clark III, F. Ernesto Penado

Author Affiliations +

Proceedings Volume 6665, New Developments in Optomechanics; 666513 (2007) https://doi.org/10.1117/12.733962
Event: Optical Engineering + Applications, 2007, San Diego, California, United States

Abstract

Engineering specifications for O-ring seal surfaces are well documented. However, when seal surfaces are located on asymmetrically loaded vacuum end-plates, consideration must be given not only to surface finish and flatness, but also to load-induced deflections. When deflections are significant, O-ring compression can relax and potentially cause vacuum leaks. Large vacuum systems, such as the 9000 cubic foot system at the Navy Prototype Optical Interferometer (NPOI), cannot afford costly vacuum leaks due to improper end-plate design. The NPOI employs vacuum end-plates that serve both as structural members, and as vacuum system entrance and exit ports for stellar light. These ports consist of vacuum components attached directly to the end-plate via static O-ring sealing techniques. Optical geometry dictates off-center port locations, which create asymmetric end-plate loading. This paper details the behavior of a 22 inch diameter, multi-port, end-plate for the NPOI Fast Delay Line subsystem. In depth CAD modeling and finite element analysis techniques were used to determine load-induced stress distributions and deflections in the end-plate. After several design iterations, an end-plate design was substantiated that maintains vacuum seal integrity under loading, exhibits a conservative factor of safety, and is readily manufacturable.

Citation Download Citation

Joshua P. Walton, James H. Clark III, and F. Ernesto Penado "Design of asymmetrically loaded end-plates with vacuum seal surfaces for the Navy Prototype Optical Interferometer", Proc. SPIE 6665, New Developments in Optomechanics, 666513 (17 September 2007); https://doi.org/10.1117/12.733962

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available