Gate edge roughness in electron beam direct write and its influence to device characteristics

Kang-Hoon Choi; Rok Dittrich; Matthias Goldbach; Christoph Hohle; Katja Keil; Thomas Marschner; Mark Tesauro; Frank Thrum; Roy Zimmermann; Johannes Kretz

doi:10.1117/12.772649

20 March 2008 Gate edge roughness in electron beam direct write and its influence to device characteristics

Kang-Hoon Choi, Rok Dittrich, Matthias Goldbach, Christoph Hohle, Katja Keil, Thomas Marschner, Mark Tesauro, Frank Thrum, Roy Zimmermann, Johannes Kretz

Author Affiliations +

Proceedings Volume 6921, Emerging Lithographic Technologies XII; 69210J (2008) https://doi.org/10.1117/12.772649
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

Line edge roughness (LER) and line width roughness (LWR) have raised questions and concerns as current lithography techniques reduce critical dimensions (CD) below 50 nm. There are few applications of controlled variation of LER and LWR, even among those which use electron beam direct writing (EBDW), although it is highly desirable to test the influence of systematical variation of LER and LWR on actual semiconductor devices. To get a clear understanding how and what the LERs and LWRs are influencing in EBDW, we have designed and fabricated transistor gates with programmed LER and LWR using EBDW and observed those based on CD-SEM metrology. The obtained results including calculated power spectrum density (PSD) shows the capability of EBDW to control the LER/LWR. Further, the influence of edge/width roughness in EBDW on device characteristics is reviewed and it gives how the effect of LWR/LER translates to device performance in DRAM process flow. It is found that the control of LWR is more important than that of LER for future lithography developments.

Citation Download Citation

Kang-Hoon Choi, Rok Dittrich, Matthias Goldbach, Christoph Hohle, Katja Keil, Thomas Marschner, Mark Tesauro, Frank Thrum, Roy Zimmermann, and Johannes Kretz "Gate edge roughness in electron beam direct write and its influence to device characteristics", Proc. SPIE 6921, Emerging Lithographic Technologies XII, 69210J (20 March 2008); https://doi.org/10.1117/12.772649

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE