Paper
10 April 2008 Evaluation of coupled piezoelectric and electromagnetic technique for vibration energy harvesting
Vinod R. Challa, M. G. Prasad, Frank T. Fisher
Author Affiliations +
Abstract
Vibration energy harvesting is an attractive technique for potential powering of wireless sensors and other low power micro devices. In order for the device to have maximum power output, it is necessary to match electrical and mechanical damping. In this work a coupled piezoelectric and electromagnetic energy harvesting device is evaluated for its efficiency and compared with optimized standalone piezoelectric and electromagnetic techniques. A piezoelectric cantilever beam with a cylindrical magnet as its tip mass and a resonance frequency of 19 Hz is used, with a coil winding vertically aligned with the magnet such that the magnetic tip would pass through the coil. The total power output from the coupled energy harvesting technique is monitored which produced a power output of ~340 μW compared to 301 μW from an optimized standalone piezoelectric energy harvesting and 120 μW from an standalone electromagnetic energy harvesting device. The total damping in the system is determined to be 0.054 compared to 0.046 and 0.04 for piezoelectric and electromagnetic techniques.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vinod R. Challa, M. G. Prasad, and Frank T. Fisher "Evaluation of coupled piezoelectric and electromagnetic technique for vibration energy harvesting", Proc. SPIE 6935, Health Monitoring of Structural and Biological Systems 2008, 69351W (10 April 2008); https://doi.org/10.1117/12.776394
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Energy harvesting

Electromagnetism

Resistance

Magnetism

Instrument modeling

Fabrication

Sensors

Back to Top