Paper
10 September 2008 Accelerated stress testing and diagnostic analysis of degradation in CdTe solar cells
Author Affiliations +
Abstract
Solar cell module reliability is inextricably linked to cell-level reliability. This is particularly so with thin-film technologies. In CdTe, reliability issues historically associate with back contact stability and the use of Cu as an extrinsic dopant. Using a simple approach by which identical cells are heated under open-circuit bias and 1-sun illumination, degradation activation energies of 0.63 and 2.94 eV in laboratory-scale CdS/CdTe devices were identified in the accelerated stress temperature range of 60 to 120 °C. At lower stress temperatures, cell performance changes were linearly correlated with changes in both fill factor (FF) and short-circuit current (Jsc). At higher stress temperatures, changes in efficiency were correlated with changes in FF and open-circuit voltage (Voc). The measured activation energy of 0.63 is associated with Cu-diffusion. During the early stage of stress testing, which may provide additional back contact annealing, improvements in FF were due to Cu-diffusion. Decreased performance observed at longer stress times (decreased FF and Voc), according to a two-diode Pspice model, were due to both increased space-charge recombination (near the junction) and decreased recombination in the bulk. Kirkendall void formation (S-outdiffusion) at the CdS/CdTe interface is given as responsible for the 2.9 eV degradation mechanism.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David S. Albin "Accelerated stress testing and diagnostic analysis of degradation in CdTe solar cells", Proc. SPIE 7048, Reliability of Photovoltaic Cells, Modules, Components, and Systems, 70480N (10 September 2008); https://doi.org/10.1117/12.795360
Lens.org Logo
CITATIONS
Cited by 37 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffusion

Copper

Temperature metrology

Cadmium sulfide

Solar cells

Diodes

Reliability

Back to Top