PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731101 (2009) https://doi.org/10.1117/12.832720
This PDF file contains the front matter associated with SPIE Proceedings Volume 7311, including the Title Page, Copyright information, Table of Contents, and the Conference Committee listing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731103 (2009) https://doi.org/10.1117/12.819306
Using the high penetrability of the terahertz waves and the characteristic absorption spectra in this frequency range, we
built a non-invasive mail inspection system targeting drugs and explosives. The system is composed of two stages; in
the first stage, the scattering of a continuous terahertz wave is used for selecting mail that contains concealed powder; in
the second stage, the absorption spectrum of the suspicious mail is measured and the material is identified using a
terahertz spectrum database. We evaluated the performance and the limits of the inspection system.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731104 (2009) https://doi.org/10.1117/12.818134
The terahertz (THz) portion of the electromagnetic spectrum provides specific spectroscopic information for substance
identification. It has been shown that the spectral features of explosive materials might be used for detection and
identification at stand-off distances. We report on the development of a THz spectrometer for explosive detection and
identification. The system is based on THz quantum cascade lasers working at different frequencies. These are used for
illumination of the object under test. The reflected and backscattered radiation from the object under test is detected with
a sensitive heterodyne receiver. As a first step a single frequency, liquid-cryogen free heterodyne receiver operating at
2.5 THz has been developed. In order to realize maximum sensitivity a phonon-cooled NbN hot electron bolometric
mixer with a quantum cascade laser as local oscillator were chosen. The concept of the system and first results will be
presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731105 (2009) https://doi.org/10.1117/12.818436
Terahertz (THz) spectroscopy is a promising technique for the stand-off identification of hidden objects. The THz band
is particularly well suited firstly because THz radiation penetrates many dielectrics like clothing and secondly because
many potentially hazardous substances have characteristic signatures in the THz spectral region. In order to demonstrate
the full potential of THz radiation for identifying possible hazards using characteristic signatures, different disturbing
influences must be taken into account.
We have performed experiments and simulations in order to investigate the possibilities and the challenges of terahertz
stand-off identification. A special emphasis is paid on humidity in ambient air and properties of the sample like surface
roughness and orientation with respect to the incident THz beam.
Water vapor absorption strongly affects the THz spectra. Since the absorption lines are strong and narrow, the
calculation must be precise. We have checked models well-known in meteorology covering the infrared and the
microwave regions of the electromagnetic spectrum and achieved an accurate description of the measured THz spectral
absorption using the program LINEFIT.
The surface roughness of the sample strongly affects the bandwidth of the reflected spectra. Specular and diffuse
reflection measurements using samples with different roughnesses have been used for determining the influences of
different properties on the reflection spectra.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731106 (2009) https://doi.org/10.1117/12.819460
We describe the generation of terahertz optical frequency comb using the spontaneous
emissions from a semiconductor optical amplifier as the signal source. The source drives
an all-fiber LYOT-Sagnac birefringent fiber. This transforms the broad band source into
a discrete set of evenly spaced frequencies. The output of the Sagnac loop mirror is then
coupled to fiber pigtailed Faraday Mirror reflecting the optical frequency comb back into
the optical amplifier for further amplification. The method resulted in generating optical
frequency comb ranging from 183THz to 213 THz with frequency spacing of 560 GHz.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731108 (2009) https://doi.org/10.1117/12.818317
Recently, there has been a significant interest in Terahertz (THz) technology, primarily for its potential applications in
detection of concealed objects as well as in medical imaging for non-invasive diagnostics. This region of the spectrum
has not been fully utilized due to lack of compact and efficient THz sources and detectors. However, there are several
reports recently on real-time THz imaging using uncooled microbolometer camera and quantum cascade laser (QCL)
operating as a THz illuminator. The cameras used in these studies are optimized for infrared wavelengths and do not
provide optimal sensitivity in the THz spectral range. The fabrication of microbolometer focal plane arrays (FPAs) is
relatively complex due to the required monolithic integration of readout electronics with the MEMS pixels. The recent
developments in bi-material based infrared FPAs, utilizing optical readout, substantially simplifies the FPA fabrication
process by decoupling readout and sensing. In this paper, design and fabrication of a bi-material based FPAs, optimized
for the THz wavelengths, as well as design and integration of the readout optical system for real-time imaging will be
described.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 731109 (2009) https://doi.org/10.1117/12.818741
Laser induced Semiconductor Switches (LSS), comprised of a gap antenna deposited on a semiconductor substrate and
photoexcited by a pulsed laser, are the primary source of THz radiation utilized in time-domain spectroscopy (TDS).
THz-TDS applications such as standoff detection and imaging would greatly benefit from greater amounts of power
coupled into free space radiation from these sources. The most common LSS device is based on low temperature-grown
(LT) GaAs photoexcited by Ti:sapphire lasers, but its power performance is fundamentally limited by low breakdown
voltage. By contrast, wide band-gap semiconductor-based LSS devices have much higher breakdown voltage and could
provide higher radiant power efficiency but must be photoexcited blue or ultraviolet pulsed lasers. Here we report an
experimental and theoretical study of 10 wide band-gap semiconductor LSS host materials: traditional semiconductors
GaN, SiC, and ZnO, both pristine and with various dopants and alloys, including ternary and quaternary materials
MgZnO and InGaZnO. The objective of this study was to identify the wide bandgap hosts with the greatest promise for
LSS devices and compare their performance with LT-GaAs. From this effort three materials, Fe:GaN, MgZnO and
Te:ZnO, were identified as having great potential as LSS devices because of their band-gap coincidence with frequency
multiplied Ti:Sapphire lasers, increased thermal conductivity and higher breakdown voltage compared to LT-GaAs, as
well as picoseconds scale recombination times.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110B (2009) https://doi.org/10.1117/12.820122
This paper studies the role of plasmonic modes for guided-wave propagation of THz/far infrared in metalclad
planar waveguides, including metal-dielectric interfaces, dielectric-loaded metal slabs and parallel plate
waveguides. The dispersion of modal characteristics of the plasmonic guided waves, such as the effective index,
attenuation constant and the field confinement, as a function of geometrical features for different consisting
materials and wavelengths are examined. Moreover, comparison is made between the THz plasmonic modes to
their optical counterparts at visible/near infrared within the similar physical structures. Peculiar features of
each structure are highlighted and regimes of interest are distinguished.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110D (2009) https://doi.org/10.1117/12.818726
Pronounced resonant absorption and frequency dispersion associated with an excitation of collective 2D plasmons have
been observed in terahertz (0.5-4THz) transmission spectra of grating-gate 2D electron gas AlGaN/GaN HEMT (high
electron mobility transistor) structures at cryogenic temperatures. The resonance frequencies correspond to plasmons
with wavevectors equal to the reciprocal-lattice vectors of the metal grating, which serves both as a gate electrode for the
HEMT and a coupler between plasmons and incident terahertz radiation. The resonances are tunable by changing the
applied gate voltage, which controls 2D electron gas concentration in the channel. The effect can be used for resonant
detection of terahertz radiation and for "on-chip" terahertz spectroscopy.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110E (2009) https://doi.org/10.1117/12.820304
The large aperture Fresnel zone plate antenna has been extensively investigated in recent years for
application at frequencies from the microwave range to the terahertz region. These zone plate antennas
have a focal length (F) and diameter (D) that are comparable (F/D = 0.3 to 2.5). The results of these
investigations show that the phase-correcting zone plate gives performance comparable to a true lens.
There is one limitation, however, in that most cases a secondary focus occurs on-axis at one-third the focal
distance from the zone plate. The intensity is 10 dB or more down from the main focus. A method has now
been developed to essentially eliminate this secondary focus by properly adjusting the amount and location
of the phase-correcting grooves or rings. A revised positioning of the grooves and degree of correction can
reduce the secondary focus, but maintain the integrity of the main focus. Specific examples have been
analyzed and will be presented at the conference.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110F (2009) https://doi.org/10.1117/12.818397
Recent advances in rapid prototyping technologies have resulted in build-resolutions that are now on the scales
required for direct fabrication of photonic structures in the gigahertz (GHz) and terahertz (THz) regimes. To
demonstrate this capability, we have fabricated several structures with 3D bandgaps in these spectral regions.
Characterization of the transmission properties of these structures confirms the build accuracy of this fabrication
method. The result is a rapid and inexpensive fabrication technique that can be utilized to create a variety of
interesting photonic structures in the GHz and THz. We present the results of our characterization experiments
and discuss our current efforts in extending the technique to fabrication of other structure types.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110G (2009) https://doi.org/10.1117/12.819009
The performance of a high temperature superconducting junction detector is evaluated. The detector has been built to
explore applications of terahertz imaging.
The detector device is a high-temperature superconductor (HTS) Josephson junction, which is integrated with a thin-film
ring-slot antenna. The ring-slot antenna is patterned on a magnesium oxide (MgO) substrate which is compatible with
the detector's YBCO superconducting material lattice. A hyper-hemispherical lens made from high resistivity float zone
silicon (HRFZ-Si) is mounted on the rear side of the substrate. The lens couples energy from an imaging system onto the
antenna which couples the energy into the device.
An existing terahertz imaging system is used in conjunction with the detector to allow for the exploration of relevant
applications. The imaging system is based on a conventional quasi-optical design with a backward-wave oscillator as the
source and raster scans samples for image acquisition. The imaging capability of the system has been assessed by
trialing a range of applications in both transmission and reflection modes. Applications explored include imaging
concealed weapons in packaging, non-destructive testing of materials, and imaging devices through plastic structures.
The results generated by the imaging system demonstrate its capability for these applications.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110I (2009) https://doi.org/10.1117/12.818520
Voltage-tunable plasmon resonances in a InGaAs/InP high electron mobility transistor (HEMT) are reported. The gate
contact consisted of a 0.5 micron period metal grating formed by electron-beam lithography. Narrow-band resonant
absorption of THz radiation was observed in transmission in the range 10 - 50 cm-1. The resonance frequency red-shifts
with increasing negative gate bias as expected. Photo-response to a tunable far-IR laser is reported. The device may
have application in high-frame-rate THz array detectors for spectral imaging with real-time chemical analysis.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110J (2009) https://doi.org/10.1117/12.817281
This paper presents an algorithm for detecting handguns in terahertz images. Terahertz radiation is capable of penetrating
certain materials which are opaque at optical wavelengths, such as clothing, without the harmful effects of
ionizing radiation. The approach taken is to segment objects of interest and classify them based on shape. We use a
modified version of an active contour algorithm found in the open literature. Modifications include: a pre-processing
step that includes clutter filtering and seeding of an initial contour; and a post-processing step that removes clutter
pixels from the segmentation. The features used for classification are moment-based and Fourier shape descriptors.
Classification as handgun or non-handgun from these features is done via Fisher's linear discriminant.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110K (2009) https://doi.org/10.1117/12.817913
We report on the transmission and reflection terahertz (THz) spectra of the high explosives RDX and PETN. These
common military explosives are compared to simulants L-tartaric acid and sucrose, respectively. The use of these
simulants enables researchers to develop many aspects of THz spectroscopy for explosives detection without the need
for live explosives. Further, we discuss the effect of sample preparation on the THz spectrum of RDX and demonstrate
that experiments performed on different terahertz instruments at multiple laboratories show quantitative agreement
between spectra recorded with four different instruments.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110L (2009) https://doi.org/10.1117/12.819923
A prototype THz imaging system based on modified uncooled microbolometer detector arrays, INO MIMICII camera
electronics, and a custom f/1 THz optics has been assembled. A variety of new detector layouts and architectures have
been designed; the detector THz absorption was optimized via several methods including integration of thin film metallic
absorbers, thick film gold black absorbers, and antenna structures. The custom f/1 THz optics is based on high resistivity
floatzone silicon with parylene anti-reflection coating matched to the wavelength region of interest. The integrated
detector, camera electronics, and optics are combined with a 3 THz quantum cascade laser for initial testing and
evaluation. Future work will include the integration of fully optimized detectors and packaging and the evaluation of the
achievable NEP with an eye to future applications such as industrial inspection and stand-off detection.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110M (2009) https://doi.org/10.1117/12.822189
The Submillimeter-Wave Technology Laboratory (STL) at the University of Massachusetts Lowell has investigated the
electromagnetic scattering behavior of various broadband absorbers. Several absorbing materials were tested in a
compact radar range operating at a center frequency of 160 GHz. The polarimetric radar cross section was measured at
elevation angles from 15° to 75°. In addition to the backscattering behavior, the normal incidence transmittance of the
materials was evaluated.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110O (2009) https://doi.org/10.1117/12.817925
We present a scanning THz-camera with active illumination. Three different fully electronic transceiving techniques
are evaluated: The first employs a commercial 230-320GHz frequency-modulated continuous-wave system
with a harmonic mixing detector. Its bandwidth allows a ranging resolution in the mm-range. The second one
is based on heterodyne detection operating at 645GHz with sub-harmonic mixer and provides a dynamic range
beyond 100 dB. Like in the first system, we employ local illumination (THz beam focused on observed pixel).
The third one equals the second one, but utilizes global illumination of the scene. In all cases, the scanning optics
consists of a Cassegrainian telescope with a primary mirror diameter of 23 cm and a scanning mirror, which is
spinning about a slightly tilted axis which itself is slowly rotated in a perpendicular direction to provide the second
scan-dimension. With a typical distance of 0.5m between the scanning mirror and the object plane, the field
of view covers several 100cm2. While the fast mirror axis spins with about 660RPM, the slow axis turns with
at least 1 deg. per second and the data acquisition samples about 40000 points for each THz-image. Single-pixel
detectors are used; the frame acquisition time is below 10 s. The development of a video-rate multi-pixel imager
with up to 32 sub-harmonic mixers as detectors is in progress.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110Q (2009) https://doi.org/10.1117/12.821775
This paper describes the design and performance of a ruggedized passive Terahertz imager, the frequency
of operation is a 40GHz band centred around 250GHz. This system has been specifically targeted at
vehicle mounted operation, outdoors in extreme environments. The unit incorporates temperature
stabilization along with an anti-vibration chassis and is sealed to allow it to be used in a dusty
environment.
Within the system, a 250GHz heterodyne detector array is mated with optics and scanner to allow real
time imaging out to 100 meters. First applications are envisaged to be stand-off, person borne IED
detection to 30 meters but the unique properties in this frequency band present other potential uses such
as seeing through smoke and fog. The possibility for use as a landing aid is discussed.
A detailed description of the system design and video examples of typical imaging output will be
presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
J. Allen Cox, R. Higashi, F. Nusseibeh, K. Newstrom-Peitso, C. Zins, R. Osiander, J. Lehtonen, E. Dodson
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110R (2009) https://doi.org/10.1117/12.818766
We report experimental results on recently developed MEMS-based, uncooled THz detectors and imaging
applications for linear focal plane arrays constructed from them. The detector incorporates a broadband
micro-antenna coupled to an impedance-matched microbridge. Micro-antennas were fabricated having cut-on
frequencies of 500GHz, 650GHz, and 1.5THz, each with bandwidth of several hundred GHz. Sensitivity and
frequency response of the detectors is predicted to be ~6pW/√Hz (with backplane) and 7kHz, respectively,
and supporting measurements of the first devices will be presented. Fully integrated 1x8 linear focal plane
arrays have been assembled and will be used in on-going imaging demonstrations.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110U (2009) https://doi.org/10.1117/12.818340
A method, suggested by us earlier for identification of materials with close spectra in terahertz range of frequencies and
based on the analysis of medium response spectral lines dynamics, is verified experimentally. The temporal dynamics
of spectral lines allows to determine relaxation time of rotational transitions as well. A question about measurement
time, that is sufficient for determining of material response characteristic time, is discussed. To demonstrate the efficiency
of proposed method, we treat the response of soap and chocolate under the action of terahertz pulse with a few
cycles. Our investigation shows that it is possible to identify these materials with high probability.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110V (2009) https://doi.org/10.1117/12.818986
In this paper, electron transport properties of terahertz (THz) step well quantum cascade laser structures are analyzed.
These types of structures can allow for the radiative and LO-phonon transitions to be placed within the same well.
Under such an arrangement there are three main energy levels, where the transition from the upper state to the middle
state is at the THz radiative spacing and the transition from the middle state to the lower state is at or near the LOphonon
energy (~ 36 meV in GaAs). The middle state (upper phonon or lower lasing state) is a single energy state,
contrasting to previous LO-phonon based quantum cascade laser (QCL) designs that have doublet states. By having
vertical radiative and LO-phonon transitions within the same well, it is possible for these types of structures to yield high
oscillator strengths, which can lead to increased gain in the active region provided the upper state lifetime and injection
efficiency are maintained. The step in the well allows for high injection efficiency due to the spatial separation of the
wavefunctions. Monte Carlo simulations are used to analyze the structure in order to investigate these properties.
Subband populations, electron temperatures, gain, and current density are extracted from the simulations. Comparisons
are made to other existing conventional square well LO-phonon based QCLs. Our analysis indicates that these types of
structures should be comparable to other design approaches and that step well injectors can be used to increase the
injection efficiency for THz QCLs.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110W (2009) https://doi.org/10.1117/12.819007
We have designed a terahertz imaging system, built with electronic components and operating at a single tunable
frequency. The system scans in hybrid mode, combining coarse mechanical positioning with a fine scan produced
by perturbing the beam with a system of opaque masks, placed into the collimated beam. The mask set is
based on a modified Hadamard design, which aims at minimizing the loss of power and noise effects. The image
acquisition is performed in transmission mode, with the sample placed at the focal plane. We present several
imaging results obtained using our technique.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
Proceedings Volume Terahertz Physics, Devices, and Systems III: Advanced Applications in Industry and Defense, 73110X (2009) https://doi.org/10.1117/12.819149
Excitation of electrically biased photoconductive switches with femtosecond optical pulses is a well established method
of generating wide bandwidth (0.5 to 2.5 THz) pulses of terahertz frequency radiation. This method of pulse generation
draws energy from the bias power supply to accelerate optically injected charge carriers, giving rise to a current pulse
that can radiate into free space; nevertheless, the output power is limited by both poor coupling of the radiation out of the
substrate and by charge carrier screening. By optimizing the electrode structures and illumination geometries it may be
possible to address both of these limitations. To explore this idea, we have experimentally studied illumination with
coherent array of two sources spaced by less than a wavelength and operated near saturation in a semi-insulating GaAs
source. By illuminating with an array of N=2 spots, we demonstrate a doubling in output terahertz power with no
increase in input optical power. This result is consistent with results that have been shown for optical excitation that has
been stretched along the anode using cylindrical lenses; however, the array of two spots permits steering the beam by
adjusting the relative time of arrival of the two exciting pulses. Experimental evidence of this beam steering is presented.
With proper electrode design, this approach may ultimately enable an N-fold increase in output power with an array of N
spots, the formation of narrow beams, and the adjustment of beam direction by control of the relative time of arrival of
the exciting optical pulses.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.