Study on fiber Bragg grating displacement sensing

Li Li; Chun-feng Ge

doi:10.1117/12.835023

24 August 2009 Study on fiber Bragg grating displacement sensing

Li Li, Chun-feng Ge

Author Affiliations +

Proceedings Volume 7381, International Symposium on Photoelectronic Detection and Imaging 2009: Material and Device Technology for Sensors; 738121 (2009) https://doi.org/10.1117/12.835023
Event: International Symposium on Photoelectronic Detection and Imaging 2009, 2009, Beijing, China

Abstract

The paper proposes a novel demodulation method of fiber grating displacement sensing with applying dual grating structure. The linear tuning sensitive structure of isosceles triangle-shaped cantilever beam is designed which can be used to eliminate the influence from environmental temperature. The fiber grating is pasted in the cantilever top and under both sides. When the cantilever free end take place the displacement, this would generate strain which can make the gratings compression and tensile respectively, furthermore, cause the changes of Bragg grating reflection wavelength. The changes of grating is caused by temperature influence in the same direction, and caused by stress change in the opposite direction. Therefore, the change of optical power caused by temperature was offset, that is, eliminate the influence from environmental temperature. When the free end has displacement or load, the grating on beam top surface was stretched, Bragg wavelength drift to the long-wave direction, and the grating under the surface is compressed, which make wavelength drift to the short-wave direction. The changes of light intensity can be seen from the spectrogram. Using linear tuning properties without chirped of cantilever beam, micro-displacement in the free end can effective turned into the strain of equal intensity beam. The changes of Bragg wavelength caused by strain can be shown in optical power meter, and would be transformed into voltage display through demodulation system. Therefore, displacement sensing information is derived indirect; the optical measurement of micro-displacement is realized. The experiment result shows the system sensitivity is 0.87mV/μm, and displacement resolution is 2.12nm/mm.

Citation Download Citation

Li Li and Chun-feng Ge "Study on fiber Bragg grating displacement sensing", Proc. SPIE 7381, International Symposium on Photoelectronic Detection and Imaging 2009: Material and Device Technology for Sensors, 738121 (24 August 2009); https://doi.org/10.1117/12.835023

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Fiber Bragg gratings

Demodulation

Temperature metrology

Reflection

Sensing systems

Structured optical fibers

Bridges

Show All Keywords

Keywords/Phrases

Search In:

Publication Years