Skeleton-based botanic tree diameter estimation from dense LiDAR data

Alexander Bucksch; Roderik Lindenbergh; Massimo Menenti; Muhammad Z. Rahman

doi:10.1117/12.825997

11 August 2009 Skeleton-based botanic tree diameter estimation from dense LiDAR data

Alexander Bucksch, Roderik Lindenbergh, Massimo Menenti, Muhammad Z. Rahman

Author Affiliations +

Proceedings Volume 7460, Lidar Remote Sensing for Environmental Monitoring X; 746007 (2009) https://doi.org/10.1117/12.825997
Event: SPIE Optical Engineering + Applications, 2009, San Diego, California, United States

Abstract

New airborne LiDAR (Light Detection and Ranging) measurement systems, like the FLI-MAP 400 System, make it possible to obtain high density data containing far more information about single objects, like trees, than traditional airborne laser systems. Therefore, it becomes feasible to analyze geometric properties of trees on the individual object level. In this paper a new 3-step strategy is presented to calculate the stem diameter of individual natural trees at 1.3m height, the so-called breast height diameter, which is an important parameter for forest inventory and flooding simulations. Currently, breast height diameter estimates are not obtained from direct measurements, but are derived using species dependent allometric constraints. Our strategy involves three independent steps: 1. Delineation of the individual trees as represented by the LiDAR data, 2. Skeletonization of the single trees, and 3. Determination of the breast height diameter computing the distance of a suited subset of LiDAR points to the local skeleton. The use of a recently developed skeletonization algorithm based on graph-reduction is the key to the breast height measurement. A set of four relevant test cases is presented and validated against hand measurements. It is shown that the new 3-step approach automatically derives breast height diameters deviating only 10% from hand measurements in four test cases. The potential of the introduced method in practice is demonstrated on the fully automatic analysis of a LiDAR data set representing a patch of forest consisting of 49 individual trees.

Citation Download Citation

Alexander Bucksch, Roderik Lindenbergh, Massimo Menenti, and Muhammad Z. Rahman "Skeleton-based botanic tree diameter estimation from dense LiDAR data", Proc. SPIE 7460, Lidar Remote Sensing for Environmental Monitoring X, 746007 (11 August 2009); https://doi.org/10.1117/12.825997

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE