Paper
20 October 2009 Fatigue crack growth properties of the base metal and weld metal of a 9% Ni steel for LNG storage tank
Young-Kyun Kim, Kyu-Taek Shim, Jae-Hoon Kim
Author Affiliations +
Proceedings Volume 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering; 74936D (2009) https://doi.org/10.1117/12.843517
Event: Second International Conference on Smart Materials and Nanotechnology in Engineering, 2009, Weihai, China
Abstract
Newly developed heavy thick plates of 9% Ni steel for large capacity of LNG tank were fabricated to conduct a fatigue crack growth test. The weld metal specimens were also fabricated by taking the same weld procedures which are applied to actual LNG storage tank inner shell. The effect of changes in load ratio, R, and test temperature on the fatigue crack growth rate has been investigated. Separate fatigue crack growth experiments were performed at load ratio of 0.1 and 0.5 at -162°C and compared to the behavior at room temperature. The fatigue crack growth rates of weld metal were nearly the same as those of the base metal irrespective of load ratio change at room temperature. A decrease in temperature decreased the fatigue crack growth rates of base metal but in the case of weld metal only small scatters appeared in the fatigue crack growth rate compared with those of base metals. The fatigue crack growth rates were dominated by residual stress due to welding processes rather than temperature effects.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Young-Kyun Kim, Kyu-Taek Shim, and Jae-Hoon Kim "Fatigue crack growth properties of the base metal and weld metal of a 9% Ni steel for LNG storage tank", Proc. SPIE 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering, 74936D (20 October 2009); https://doi.org/10.1117/12.843517
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metals

Nickel

Temperature metrology

Scanning electron microscopy

Cryogenics

Heat treatments

Nanolithography

RELATED CONTENT


Back to Top