975-nm high-power broad area diode lasers optimized for narrow spectral linewidth applications

P. Crump; C. M. Schultz; A. Pietrzak; S. Knigge; O. Brox; A. Maaßdorf; F. Bugge; H. Wenzel; G. Erbert

doi:10.1117/12.839570

17 February 2010 975-nm high-power broad area diode lasers optimized for narrow spectral linewidth applications

P. Crump, C. M. Schultz, A. Pietrzak, S. Knigge, O. Brox, A. Maaßdorf, F. Bugge, H. Wenzel, G. Erbert

Author Affiliations +

Proceedings Volume 7583, High-Power Diode Laser Technology and Applications VIII; 75830N (2010) https://doi.org/10.1117/12.839570
Event: SPIE LASE, 2010, San Francisco, California, United States

Abstract

Many pumping and direct diode applications of high power diode lasers require sources that operate within a narrow (< 1nm) temperature stable spectral line. The natural linewidth of high power broad area lasers is too wide (4-5nm) and varies too quickly with temperature (0.3-0.4nm/K) for such applications. The spectrum can be narrowed by introducing gratings within the diode laser itself or by the use of an external stabilization via a Volume Bragg Grating, VBG. For optimal loss-free, low cost wavelength stabilization with a VBG, the narrowest possible far field angles are preferred, provided power and efficiency are not compromised. Devices that contain internal gratings are potentially the lowest manufacturing cost option, provided performance remains acceptable, as no external optics are required. Therefore, in order to address the need for high power with narrow linewidth, three different diode laser device designs have been developed and are discussed here. For VBG use, two options are compared: (1) devices with high conversion efficiency (68% peak) and reasonable far field (45° with 95% power content) and (2) devices with extremely small vertical far field angle (30° with 95% power content) and reasonable conversion efficiency (59% peak). Thirdly, the latest performance results from broad area devices with internal distributed feedback gratings (DFB-BA Lasers) are also presented, constructed here using buried overgrowth technology. DFB-BA lasers achieve peak conversion efficiency of 58% and operate with < 1nm linewidth operation to over 10W continuous wave at 25°C. As a result, the system developer can now select from a range of high performance diode laser designs depending on the requirements.

Citation Download Citation

P. Crump, C. M. Schultz, A. Pietrzak, S. Knigge, O. Brox, A. Maaßdorf, F. Bugge, H. Wenzel, and G. Erbert "975-nm high-power broad area diode lasers optimized for narrow spectral linewidth applications", Proc. SPIE 7583, High-Power Diode Laser Technology and Applications VIII, 75830N (17 February 2010); https://doi.org/10.1117/12.839570

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE