Influence of massively parallel e-beam direct-write pixel size on electron proximity correction

S. J. Lin; P. S. Chen; J. J. Shin; W. C. Wang; Burn J. Lin

doi:10.1117/12.869896

4 April 2011 Influence of massively parallel e-beam direct-write pixel size on electron proximity correction

S. J. Lin, P. S. Chen, J. J. Shin, W. C. Wang, Burn J. Lin

Author Affiliations +

Proceedings Volume 7970, Alternative Lithographic Technologies III; 79700Z (2011) https://doi.org/10.1117/12.869896
Event: SPIE Advanced Lithography, 2011, San Jose, California, United States

Abstract

Massively E-beam maskless lithography (MEBML2) is one of the potential solutions for 32-nm half-pitch and beyond. In the past, its relatively low throughput restricted EBDW development to mostly mask making, small volume wafer production and prototyping. Recently the production worthy ML2 approaches, >10,000 e-beams writing in parallel, have been proposed by MAPPER, KLA and IMS. These approaches use raster scan in pattern writing. Hence the bitmap is certainly the final data format. The bitmap format used to have huge data volume with fine pixel size to maintain the CD accuracy after electron proximity correction (EPC). Data handling becomes necessary, especially on data transmission rate. The aggregated data transmission rate would be up to 1963 Tera bits per second (bps) for a 10 WPH tool using 1-nm pixel size and 1-bit gray level. It needs 19,630 fibers each transmitting 10 Gbps. The data rate per beam would be >20 Gbps in 10,000-beam MEBML2. Hence data reduction using bigger pixel size to achieve sub-nm EPC accuracy is crucial for reducing the fiber number to the beam number. In this paper, the writing-error-enhanced-factor to quantitatively characterize the impact of CD accuracy by various total blur in resist is reported; and we propose the vernier pattern to verify sub-nm CD accuracy and the in-house dithering raster method to achieve sub-0.2-nm CD accuracy using multiple-nm pixel sizes, which could reduce the need of the aggregated data rate to 11%, 33%, 44% and 79% of 1963 Tbps on 22-nm, 16-nm, 11-nm, 8-nm node respectively.

Citation Download Citation

S. J. Lin, P. S. Chen, J. J. Shin, W. C. Wang, and Burn J. Lin "Influence of massively parallel e-beam direct-write pixel size on electron proximity correction", Proc. SPIE 7970, Alternative Lithographic Technologies III, 79700Z (4 April 2011); https://doi.org/10.1117/12.869896

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE