Detection of damages in nonlinear reinforced concrete frames

Ai-Lun Wu; Jann N. Yang; Chin-Hsiung Loh

doi:10.1117/12.877203

14 April 2011 Detection of damages in nonlinear reinforced concrete frames

Ai-Lun Wu, Jann N. Yang, Chin-Hsiung Loh

Author Affiliations +

Proceedings Volume 7981, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2011; 79812O (2011) https://doi.org/10.1117/12.877203
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

An objective of the structural health monitoring system is to identify the state of the structure and to detect its damages after a major event, such as the earthquake, to ensure the reliability and safety of structures. Innovative analysis techniques for the damage detection of structures have been extensively studied recently. However, practical and effective damage identification techniques remain to be developed for nonlinear structures, in particular nonlinear hysteretic reinforced concrete (RC) structures. In this paper, in addition to the equivalent time-varying linear model, a smooth hysteretic model with stiffness and strength degradations and with the pinching effect is used to represent the dynamic characteristics of reinforced concrete (RC) frames. A system identification technique capable of detecting damages in nonlinear structures, referred to as the adaptive quadratic sum-square error with unknown inputs (AQSSE-UI), is used to track the degradation of the time-varying parameters of nonlinear RC frames. The performance of the AQSSE-UI technique is also demonstrated by the experimental data. Six identical 1/2-scale one-story two-bay RC frames have been designed and tested on the shake table at NCREE, Taiwan. Each RC frame was subject to different levels of seismic excitations followed by cyclic loads until failure. Test data were used to verify the capability of the AQSSE-UI technique in detecting structural damages. Experimental results demonstrate that the AQSSE-UI technique is quite effective in tracking (i) the stiffness degradation of equivalent linear time-varying structure, and (ii) the non-linear hysteretic parameters with stiffness and strength degradations.

Citation Download Citation

Ai-Lun Wu, Jann N. Yang, and Chin-Hsiung Loh "Detection of damages in nonlinear reinforced concrete frames", Proc. SPIE 7981, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2011, 79812O (14 April 2011); https://doi.org/10.1117/12.877203

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE